Belkin F5U508 User Manual page 23

P73954-B-F5U508-man_5-02.qxd
Installation (continued)
16. Installation of the "USB 2.0 Root Hub Device" is now
complete. Click "Finish".
17. The "IEEE 1394 Network Device" is now detected and
installed. Windows will present you with the option of
setting up a network. If you do not wish to set up an IEEE
1394 network, ignore this option. (Please check your
Windows XP help file for more information on setting up
and using an IEEE 1394 network).
The installation procedure is now complete.
Verifying Proper Installation (Windows XP)
After installation, check the Device Manager to confirm that the
PCI Card has been properly installed.
1. Right-click on "My Computer".
2. Select "Properties".
3. Select the "Hardware" tab and click on the "Device
Manager" button.
4. Click the plus sign (+) next to "Universal Serial Bus
Controllers".
The "Universal Serial Bus Controllers" list will now include two
"NEC USB Open Host Controller" entries, one "Belkin USB 2.0
Hi-Speed Host Controller" entry, one "USB 2.0 Root Hub
Device" entry and two "USB Root Hub" entries.
Note: If your computer features built-in USB ports, or if you
have other USB PCI controllers installed, you will see additional
"root hub" entries.
10/1/02 2:13 PM Page 19
19