Download Print this page
Hide thumbs Also See for MoPac STR029:

Advertisement

Quick Links

MoPac Wardrobe
STR029
Two person
Scan QR code for
assembly
product webpage
For assembly assistance, visit upliftdesk.com/contact, call 800-349-3839, or email support@upliftdesk.com
©2024 UPLIFT Desk®. All Rights Reserved

Advertisement

loading
Need help?

Need help?

Do you have a question about the MoPac STR029 and is the answer not in the manual?

Questions and answers

Summary of Contents for Uplift Desk MoPac STR029

  • Page 1 MoPac Wardrobe STR029 Two person Scan QR code for assembly product webpage For assembly assistance, visit upliftdesk.com/contact, call 800-349-3839, or email support@upliftdesk.com ©2024 UPLIFT Desk®. All Rights Reserved...
  • Page 2: Safety And Warnings

    Safety and Warnings WARNING: Read all instructions before assembly. Failure to assemble or operate properly may result in damage or personal injury. Retain this manual for future reference. WARNING: Use of the MoPac Security Strap Kit is required. See instructions included in the MoPac Security Strap Kit for assembly steps.
  • Page 3 H11- M6x13 Binding Post Security Strap Kit Machine Screw urity Strap Kit H11- M6x13 Binding Post H2- Felt Pads for stacking H2- Felt Pads for stacking Security Strap Kit Security Strap Kit © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 4 MoPac Accessories • The MoPac Wardrobe may be used in a variety of configurations with or without accessories. • The instructions for each accessory are included with the accessory. • MoPac Base, Stacking Brackets, and Cabinet sold separately. MoPac Base MoPac Stacking Brackets MoPac Cabinet STR034...
  • Page 5 Cam Lock Pins (H1) into the plastic inserts in the holes shown on the Bottom Panel (P2). B. With a hammer, gently tap eight Wood Dowels (H4) into the holes shown on the Bottom Panel (P2). © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 6 Step 3 A. Do NOT overtighten the Cam Lock Pins as this can strip the plastic inserts. With a Phillips head screwdriver, install six Cam Lock Pins (H1) into the plastic inserts in the holes shown on the Top Panel (P7). Note: Ensure the Cam Lock Pins (H1) are contacting the face of the...
  • Page 7 Cam Lock Pins (H1) into the plastic inserts in the holes shown on the Right Side Panel (P6). D. With a hammer, gently tap five Wood Dowels (H4) into the holes shown on the Right Side Panel (P6). © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 8 Step 4 Continued E. Repeat the previous steps for the Left Side Panel (P5).
  • Page 9 Shelf (P4). Do NOT overtighten the Cam Lock Pins as this can strip the plastic inserts. D. With a hammer, gently tap two Wood Dowels (H4) into the holes shown on the Fixed Shelf (P4). © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 10 Step 6 A. Insert four Cam Lock Barrels (H2) into each of the four holes along the Divider Panel (P3) where shown. B. Ensure the open ends of the Cam Lock Barrels align with the holes along the ends of the panel. Step 7 A.
  • Page 11 Panel (P7) with the pre-drilled holes along the edge of the right, left, and back panels, inserting the Cam Lock Pins into the Cam Lock Barrels installed on all three panels. C. Ensure there are no gaps between joined panels. © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 12 Step 12 A. Once all of the panels are joined together, use the provided allen wrench to insert a Cam Lock Set Screw (H3) into each of the 26 previously installed Cam Lock Barrels (H2) along all of the panel faces. Note: Ensure that the Cam Lock Barrels and Cam Lock Set Screws are below the surface of the panels and not...
  • Page 13 F. With assistance again, gently rotate the wardrobe so the Left Side Panel (P5) is facing down and repeat the Step 14 to attach the second Door. © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 14 Step 15 A. With assistance, gently bring the wardrobe assembly upright so the Leveling Glides (H5) are contacting the floor. B. Align the holes of one of the packaged Handles with accompanying fasteners (H7) with the two holes on the exterior face of one of the Doors and attach it using the two included screws through the holes on the interior face of the Door.
  • Page 15 B. Place an Adjustable Shelf on top of each set of Shelf Pins. © UPLIFT Desk • 800-349-3839 • support@upliftdesk.com • upliftdesk.com...
  • Page 16 Study this manual carefully. If this product is sold, please provide this manual to the buyer, installers, or support personnel operating the product. Copyright Notice: This manual is a component of this UPLIFT Desk product. This manual is a ©...