Troubleshooting; Product Limitations - Targus USB 2.0 LATPOP DOCKING STATION User Manual

Troubleshooting

Device Not Working
• Make sure that the device is fully inserted into the correct port on
the docking station.
• Plug the device into a different port on the docking station. If it
still doesn't work, test the device by connecting it directly to your
computer.
• Verify that you ran the Setup or Install program for the device.
• Make sure that the device appears in Device Manager. For more
information refer to "Verifying Devices are Installed"
• Disconnect all devices from the docking station and reconnect
them, one at a time. Check that each device works before plug-
ging in the next one.
• Each USB port is equipped with over-current protection. Should a
USB device draw more current than the USB port can supply, the
port will shut down. To re-enable the port, unplug the device and
go to Device Manager or to the message in the system tray and
choose the Reset option. You can then plug the device back into
the USB port. If a shut down reoccurs, check the power require-
ments of the device.

Product Limitations

Some devices may halt temporarily when a high data transfer is
occurring. For example, your mouse may respond slowly while a
graphic print job is printing or while you are experiencing heavy
network traffic. We recommend the following guidelines:
• Do not transfer data to or from multiple high-speed devices, such
as a digital camera or scanner, at the same time.
• If speed degradation does occur, close other programs that use a
USB device to improve device performance.
Targus USB 2.0 Laptop Docking Station with Video
19