DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This UHD Audio Extractor & Inserter can take the selected audio from an HDMI, ARC (from HDMI Output 1), optical, or analog source and output it simultaneously over the unit’s HDMI, optical, and analog outputs. This allows the user to convert an audio source using high quality ADC/DAC processing for use with powered speakers or an AV receiver that otherwise would not be able to support the original format.
5. FEATURES HDMI 2.0 and DVI 1.0 compliant HDCP 1.x and 2.2 compliant 1 HDMI input and 2 mirrored HDMI outputs Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output Supports pass-through of 10/12-bit HDR sources HDMI supports pass-through of multiple audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream Freely selectable audio extraction source...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel AUDIO AU-11PRO SOURCE EDID 1. HDMI 1. TV CONSOLE 2. OPTICAL 2. BITSTREAM 3. LINE 3. LPCM 2CH 4. ARC 4. USER POWER LINK POWER LED: This LED will illuminate to indicate the unit is on and receiving power.
CONSOLE USB-C Port: This slot is for EDID management, control and firmware update use. Connect directly to your PC/laptop using a standard USB-C cable and send serial commands (via virtual COM port). 6.2 Rear Panel OPTICAL LINE POWER ARC IN HDMI OUT 1~2 Ports: Connect to HDMI TVs, monitors, or amplifiers for digital video and audio output.
6.4 Serial Commands (via USB-C) COMMAND Description and Parameters help Show all available commands. help N1 Show details about the specified command. N1 = {Command} ? Show all available commands. ? N1 Show details about the specified command. N1 = {Command} get fw ver ...
Page 12
COMMAND Description and Parameters set feedback broadcast N1 Enable or disable the broadcast of console command feedback. Available values for N1: [Enable] [Disable] get feedback broadcast Show the current console command feedback broadcast state. set system reboot Reboot the unit.
Page 13
COMMAND Description and Parameters get audio out A route Show the current audio source routed to the HDMI/Optical/Line outputs. get in 1 edid Show the currently selected EDID used on the HDMI input. set user 1 edid data N1 Upload a new EDID (in hex format) for use as the specified User EDID.
7. CONNECTION DIAGRAM Power Supply AUDIO SOURCE EDID POWER LINK 1. HDMI 1. TV 2. OPTICAL 2. BITSTREAM CONSOLE 3. LINE 3. LPCM 2CH 4. ARC 4. USER UHD + Audio Extractor & Inserter OPTICAL LINE POWER HDMI ARC IN Output Optical Output...
8.3.2 Analog Audio Analog Input Max Audio Level 2Vrms Impedance 20kΩ Type Unbalanced Analog Output Max Audio Level 2Vrms THD+N < -75dB@0dBFS 1kHz (A-wt) > 105dB@0dBFS Frequency Response < ±1dB@20Hz~20kHz Crosstalk < −80dB@10kHz Impedance 470Ω Type Unbalanced...
Need help?
Do you have a question about the AU-11PRO and is the answer not in the manual?
Questions and answers