Related Manuals for Blastrac BS 75
Summary of Contents for Blastrac BS 75
- Page 1 User Guide Blastrac BS 75 Martello Hire & Logistics Limited Unit 12 Riverside Industrial Estate West Hythe Road Hythe Kent CT21 4NB Tel: 01303 901399 P a g e...
- Page 2 Only authorised and trained personnel may operate this machine. Machine Description The Blastrac BS-75 stripper is ideally suited for small and medium sized applications. The electric drive system is strong and easy to operate with forward and backward speed controls.
- Page 3 Personal Safety Always wear Personal Protective Equipment (PPE), whilst working around or when operating the machine. • FFP2 mask or higher • EN166 Goggles or glasses with lateral protection • Hearing protection • EN388 Cut level 3 resistant and vibration dampening gloves •...
- Page 4 Remove cables by the connector not the cable. • Do not attempt to repair the machine yourselves. Please contact Martello Hire. • Blastrac supplied parts to be used only. • Do not use in a manner other than described. •...
- Page 5 Electric Controls The selection switch (1) is mounted on top of the machine. Switch to 1 to activate the drive motors and the machine is ready to drive using the control levers (3 & 4). The drive speed can be adjusted with the drive speed control (2). Use the right switch lever (3) to drive forward and the left switch lever (4) to drive backward.
- Page 6 Blade Choice Proper blade size and placement, depending on material and sub-floor type, affects performance. • Use sharp blades. Dull blades reduce cutting ability. • The harder the floor to come up, the smaller the blade needed for best results. •...
- Page 7 1. Selection switch must be in the ‘0’ position. 2. Turn speed control to slowest position. 3. Plug in mains 4. Turn the selection switch to position ‘2’ 5. Engage forward or reserve switch. 6. Increase speed control to desired speed. The frequency drive has been factory set, do not change any setting of the frequency drive.
- Page 8 Checker-Board Ditching: • To make carpet removal and clean up easier • Use a wide self-scoring blade across the floor • Remove remaining flooring in the opposite direction, this will create smaller pieces of debris that are easier to dispose of. •...
Need help?
Do you have a question about the BS 75 and is the answer not in the manual?
Questions and answers