LEGRAND VADDIO EasyIP Tx/Rx Installation Manual

Installation Guide for the
EasyIP Tx/Rx
This guide contains only the information required to install this product. Refer to the Complete Manual
for EasyIP Tx/Rx HDMI to AV-over-IP Encoder and AV-over-IP to HDMI Decoder for information on
configuring and using this product.
Overview
This guide provides information about:
EasyIP Tx/Rx HDMI to AV-over-IP Encoder and AV-over-IP
▪
to HDMI Decoder, 999-60600-000 (worldwide)
What's in this Guide
This guide covers:
The EasyIP Ecosystem
▪
Product Features
▪
Tips for a successful installation
▪
Information on connecting the system components
▪
System power-on
▪
The EasyIP Ecosystem
Vaddio® EasyIP is an AV-over-IP solution designed for flexible and approachable conferencing, extension,
and presentation systems. EasyIP products are designed to be used together, and have limited or no
compatibility with other types of products.
EasyIP cameras deliver video in Vaddio's proprietary EasyIP format.
▪
An EasyIP host device (EasyIP Decoder, EasyIP Mixer) is required to convert the cameras' output
▪
signal to a USB stream.
Other EasyIP receivers (such as EasyIP PCC or EasyIP Tx/Rx units in Rx Mode) can take in EasyIP
▪
streams and convert to other outputs.
Only paired EasyIP cameras can be controlled by the EasyIP host device.
▪
EasyIP host devices automatically detect EasyIP cameras and EasyIP Tx/Rx units in Tx Mode on its
▪
own subnet for easy pairing.
Cameras are not required to be on the same subnet as the device that manages them.
▪
EasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch.
▪
Document Number 411-0071-31 Rev A – October 2024