Table of Contents
Advertisement
Controlling Your iPod
The unit will automatically switch to iPod mode when an iPod is plugged into the MediaLink4. To return to the iPod menu
from any other source menu, press the SRC button (6) on the front panel or remote control (8) until the iPod menu appe-
ars
on the screen.Further more the iPod will be recharged if the VME 9512 TS is switched ON.
NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues.
The following touch screen icons and remote control buttons are used to access the iPod menus:
Use the touchscreen, the joystick, or the directional keys on the remote control to navigate the iPod menus.
iPod Music Playback
To access iPod music files, touch the button on screen or press the AUDIO button (5) on the remote control.
• Touch the > || button on screen to play/pause.
• Touch >>| on screen, press the >>| button (19) on the remote control, or press the > button on the joystick (17) to move
to the next item on the menu.
• Touch |<< on screen, press the |<< button (17) on the remote control, or press the < button on the joystick (16) to move
to the previous item on the menu.
• Use the touch screen or press the >/|| button (18) on the remote control or the joystick ENTER button (20) on the con-
trol panel to select the highlighted menu option.
• Press the >> button (14) on the remote control or the /\ button (18) on the joystick, or touch the MENU button on screen
to return to the previous menu.
Fast Forward/Fast Reverse
Press and hold the |<< or >>| buttons on screen or on the remote control (17, 19) for 1 second and continue to hold for
fast forward or fast reverse. Release to resume normal playback.
Photo Playback
While iPod photos can be viewed on the VME 9512 TS screen, you must use the iPod to control photo playback opti-
ons. Touch the
icon on screen or press the SUB-TITLE button (9) on the remote control to access the iPod PHOTO
mode. The VME 9512 TS will release control back to the iPod so you can select video media to be displayed on the
TFT monitor. To exit PHOTO mode, touch the screen.
Video Playback
While iPod video can be viewed on the VME 9512 TS screen, you must use the iPod to control video playback
options.Touch the
button on screen or press the ANGLE button (13) on the remote control to access iPod VIDEO
mode. The VME 9512 TS will release control back to the iPod so you can select video media to be displayed on the
TFT monitor. To exit VIDEO mode, touch the screen, press the >> button (14) on the remote control, or press the MENU
button on the iPod.
NOTE: To transmit the video from your iPod to the VME 9512 TS screen, you must set the following options through
the iPod video settings menu: TV Out = On, TV
Signal = PAL, and Widescreen = On.
NOTE: After disconnecting your iPod, the VME 9512 TS will always return to the last mode accessed when the iPod is
plugged back into the unit.
92
Advertisement
Table of Contents
