Dvd/Vcd Video Operation - Audiovox VME 9512 TS Manual

Mobile multimedia receiver

Hide thumbs Also See for VME 9512 TS:

Table of Contents

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is

applied. If you attempt to play a DVD while the

vehicle is moving, the TFT screen displays "PARKING" with a blue background. Rear video screens, if applicable, will

operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (1). The unit beeps and then opens.

Closing the TFT Screen

Press the OPEN button (1) again to close the TFT screen. If the screen is in the "IN" position, it moves out before clo-

sing. Insert/Eject Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not

authorized, the 6-digit code must be entered and/or the disc must be authorized (see "General Sub-menu Features" on

page 24).

You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You

may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the

button (21) on

the unit or remote control (35) to reset the loading mechanism. Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted, press the SRC button (15) on the front panel or remote con-

trol (8) until "DISC" appears at the bottom of the screen.

Controlling Playback

To access the on-screen controls, touch the screen. Touch the 1/2 button to view a second page of controls.

Stopping Playback

Touch the stop button ( ) on the screen or press the

/ BAND button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the pause button (||) on the screen (or press the >/|| button on the remote control) to suspend disc playback.

Press the > button on the screen to resume disc playback.

Table of Contents