Table of Contents
Advertisement
Switch to Radio Tuner source
• Touch the top left corner of the screen (the RADIO circle) to view the SOURCE MENU. Touch "RADIO".
• Press the SRC button (6) on the front panel or remote control (8) to switch to the AM/FM or RADIO source.
Select FM/AM Band
Touch the BAND button (15) on the screen, or press the BAND button on the unit (4) or remote control (20) to change
between the following bands: FM1, FM2, FM3, AM1, and AM2.
NOTE: The BAND button on the unit only works when the TFT is closed.
Seek Tuning
To seek the next higher station:
• Touch the
button on screen.
• Move the joystick to the right.
To seek the next lower station:
• Touch the
button on screen.
• Move the joystick to the left.
Manual Tuning
To increase or decrease the tuning frequency one step:
• Touch the or
• Move the joystick left/right.
Direct Tuning
To enter a radio station directly, touch
the direct entry menu.
Enter the desired radio station using the on-screen number pad. Press Enter to tune to the selected station. To exit the
screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six stored stati-
ons (P1-P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (18) to open the preset screen.
3. Touch the preset number in which you would like to store the current station (or press
EXIT to cancel and close the menu). The preset number and station appears highlighted.
buttons on screen.
the button or press the GOTO button (21) on the remote control to display
78
Advertisement
Table of Contents
