Troubleshooting
If your DVD player dose not seem to be functioning properly, check the items below before you contact a service center.
Symptom
Power does not turn on
or suddenly turns off
Remote control does not work
Disc does not play
No picture and sound
No sound
Make sure the AC Power cord is securely plugged into an AC outlet.
Turn the power off and then back on.
Check that the battery is inserted in the "+" and "-" directions properly.
The batteries may be dead. Replace them with new batteries.
Check that the signal transmission is directed at the remote control sensor on the DVD player.
Check that the disc is a DVD, DVD-RW, VIDEO CD, or AUDIO CD.
Do not use a disc that has scratches or dirt.
Check that the label-side of the disc is facing up.
The pick-up lens of the DVD player may be dirty. Contact the service center for lens cleaning.
Check if the Player and the screens have power (LED indicators are on).
Check if the DC/AV cables are connected properly.
Check the volume setting. If set to zero, turn up volume level.
Check that the headphones are plugged into the PHONES and Audio jack. Speakers
cannot be used with the headphones.
~ 23 ~
Check
Need help?
Do you have a question about the ACVDS731UXT and is the answer not in the manual?