Position Menu; Route Information Screen - Audiovox NAV 103 Manual

4.1.5 Position menu

When you follow the recommended route on the map (the Cursor is the current GPS position), the Position menu replaces the Cursor menu. It does
not contain buttons that modify the current route, as the GPS position is not useful as a route point.
To open the Position menu, tap

4.1.6 Route Information screen

The Route Information screen has all the data and some of the functions you need while you navigate. There are two ways to open this screen:
• It can be opened directly from the Map screen by tapping the Turn Preview field (
• From the Navigation menu, tap the following buttons:
In the top section of the screen you see information about the current route. The fields on this screen are continuously updated while you keep the
screen open. When you open the screen, all fields contain information about reaching your final destination. Tap any of the fields to see data on the
via points starting from the first one through the final destination again.
You have the following data and functions on this screen:
Name
Route line
Estimated Arrival
Distance Left
Time Left
Method
Warning icons
Description
The upper part of this screen shows your planned
route as a horizontal line. Its leftmost point is the
start of the route, the rightmost one is the final
destination, and you can see your via point flags
along the line, spaced in proportion to their distance.
Shows the estimated arrival time at the final
destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffic jams
and other possible delays.
Shows the distance you need to travel on the route
before reaching your final destination.
Shows the time needed to reach the final destination
of the route based on information available for the
remaining segments of the route. The calculation
cannot take into account traffic jams and other
possible delays.
This field shows how the route was calculated. It
displays the Route Calculation Method: Fast, Short,
Easy or Economical.
In these square fields graphical symbols are
displayed in case warnings are attached to the
planned route. These are warnings, so icons always
show information for the whole route, even if the
data fields display values from your current position
to a via point only.
Appears only if at least one via point exists.
Appears only if there are no via points in the route.
)
Tap this field to change the content of all data fields
to via point information.
Tap this field to change the content of all data fields
to via point information.
Tap this field to change the content of all data fields
to via point information.
Tap this field to change the content of all data fields
to via point information.
Tap this field to change the content of all data fields
to via point information.
Tap any of the icons for an explanation.
Opens the Route Planning
options screen from theSettings menu.
Deletes the next via point from
the route.
Deletes the active route.
31
Function