Status Information And Hidden Controls On The Map - Audiovox NAV 103 Manual

Action
Tilt and zoom preset buttons (available in Advan-
ced mode only)
Kartenmaßstab
Icon

2.4.3 Status information and hidden controls on the map

The following information appears in the rounded field in the top left corner, the Turn Preview field. When tapping this area, the result depends on
the information currently shown.
Button(s )
Information
There is no active route in Advanced
mode
There is no valid GPS position
If the icon is a static picture, route
calculation is needed
If the icon is animated, route calcu-
lation is in progress
Next route event (next manoeuvre) GPS position and an active route
Tap one of the preset buttons to set the tilt and
zoom levels to fix, predefined values. Smart
Zoom is disabled. These buttons are available in
3D mode.
Tap&hold any of the buttons to set its value to
the current tilt and zoom levels, or to reset it to
its original value.
Audiovox navigation Software shows the scale
of the map in 2D mode.
Details
If there is no route to be navigated
in Advanced mode, this icon appe-
ars in the Turn Preview field.
If an active route exists, and there is
no valid GPS position, the view of
the sky above you is shown with co-
loured dots for each satellite. Some
dots need to turn green to be able to
navigate.
GPS position and an active route
are available, but automatic off-
route recalculation is switched off,
and you deviated from the route.
Audiovox navigation is calculating or
recalculating the route.
are available, and you navigate the
recommended route. This area
gives you information about the type
and distance of the next route event.
9
Description
Action
Tap this area to open Find.
Tap this area to open the Route
Information screen
Tap this area to make
Audiovox recalculate the recom-
mended route.
Nothing happens if you tap this area
of the screen.
Tap this area to open the Route In-
formation screen.