Entering An Address With A Postal Code; Tips On Entering Addresses Quickly; Selecting The Destination From Your Favourites - Audiovox NAV 103 Manual

• To enter a new settlement:
a. Tap the button with the name of the settlement, or if you have changed the country/state, tap
b. Start entering the settlement name on the keyboard.
c. Get to the list of search results:
• After entering a couple of characters, the names that match the string appear in a list.
• Tap
d. Pick the settlement from the list.
4. Tap the button.
5. The map appears with the selected point in the middle. Tap
calculated, and you can start navigating.

3.1.2.7 Entering an address with a postal code

All of the above address searching possibilities can be performed with entering the postal code instead of the settlement name. Find below an
example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. By default Audiovox Navigation proposes the country/state and settlement where you are. If needed, tap the button with the name of the
country/state, and select a different one from the list.
3. Tap the button with the name of the settlement, and enter the postal code:
1. Start entering the postal code on the keyboard.
2. Get to the list of results
• After entering a couple of numbers, the ones that are a match appear in a list.
3. Pick the settlement from the list.
4. Enter the street name:
a. Tap .
b. Start entering the street name on the keyboard
c. Get to the list of results:
• After entering a couple of numbers, the ones that are a match appear in a list.
• Tap , to open the list of results before it appears automatically.
d. Pick the street from the list.
5. Enter the house number:
a. Tap .
b. Enter the house number on the keyboard
c. Tap to finish entering the address.
6. The map appears with the selected point in the middle.
Tap

3.1.2.8 Tips on entering addresses quickly

• When you are entering the name of a settlement or a street, Audiovox Navigation only displays those characters that appear in possible search
results. The other characters are greyed out.
• When entering the settlement name or the street name, tap the
contain the character set.
•You can speed up finding an intersection:
• Search first for the street with a less common or less usual name; fewer letters are enough to find it.
• If one of the streets is shorter, search for that one first. You can then find the second one faster.
• You can search for both the type and the name of a road. If the same word appears in several names, for example in the name of streets, roads
and avenues, you can obtain the result faster if you enter the first letter of the street type: For example, enter Pi A to obtain Pine Avenue and skip
all Pine Streets and Pickwick Roads.
• You can also search in postal codes. This is useful when a street name is common and it is used in several districts of a city.

3.1.3 Selecting the destination from your Favourites

You can select a location that you have already saved as a Favourite to be your destination.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. Tap the Favourite that you want to set as your destination.
3. The map appears with the selected point in the middle. Tap
culated, and you can start navigating.
, to open the list of results before it appears automatically.
,
from the Cursor menu. The route is then automatically calculated, and you can start navigating.
,
from the Cursor menu. The route is then automatically
; button after a couple of letters; Audiovox Navigation lists the items that
from the Cursor menu. The route is then automatically cal-
19
.