Audiovox NAV 103 Manual page 59

The following area appears next to the above described rounded area.
When tapping this area, the result depends on the information currently shown.
Icon
The following symbols appear in the Indicator strip:
Information
There is no valid GPS position
Traffic restriction.
Second route event (manoeuvre
after the next manoeuvre)
Stops the running simulation
Route recalculation
progress
Indicator strip
Icon
Details
If there is no valid GPS position, this
symbol appears here.
When GPS position is available, but
there is no route to be navigated,
the traffic restriction of the upcoming
intersection is shown here if there is
any.
When GPS position and an active
route are both available, this field
shows the route event that follows
the next route event shown in the
above described area.
This icon appears during Route
Simulation.
During route recalculation, this field
shows the recalculation progress
between 0% and 100%.
- sounds muted/enabled
- TMC-status
Description
The sound output of Audiovox navigation is muted.
The sound output of Audiovox navigation is enabled.
No TMC receiver is connected or TMC is turned off.
A TMC receiver is connected and a radio station with TMC broadcast
is received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not be bypas-
sed (for example, the destination is on a congested street).
10
Action
Tap this area to open the GPS Data
screen to check the signal status or
the connection settings.
Nothing happens if you tap this area
of the screen.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
Tap this area to stop the
simulation.
Nothing happens if you tap this area
of the screen.
Nothing happens if you tap this area
of the screen.