Gps Position Quality Indicator; Status Indicator Strip - Audiovox NAV 103 Manual

4.1.1.1 GPS position quality indicator

This area is a status indicator, and also acts as a button that opens the Quick menu. GPS reception quality shows the current accuracy of the
position information.

4.1.1.2 Status indicator strip

This is a multiple status indicator. It indicates the following status information on a single strip:
Icon
Icon
Description
Audiovox Navigation Software has no connection to the GPS receiver:
GPS navigation is not possible.
Devices with a built-in GPS receiver are permanently connected. On
such
devices, the icon does not appear in normal circumstances.
Audiovox Navigation Software is connected to the GPS receiver, but the
signal is too weak and the receiver cannot determine the GPS position.
GPS navigation is not possible.
Only a few satellites are received. Position information is available, but
elevation (altitude) cannot be calculated.
GPS navigation is possible, but the position error may be significant.
Altitude information is available, the position is a 3D position.
GPS navigation is possible.
Description
The sound output of AUDIOVOX Navigation Software is muted.
The sound output of AUDIOVOX Navigation Software is enabled.
No TMC receiver is connected or TMC is turned off.
A TMC receiver is connected and a radio station with TMC broadcast is
received.
There are new, unread TMC events.
A part of the route is bypassed based on TMC events.
A part of the route is mentioned in TMC events but could not be bypas-
sed (for example, the destination is on a congested street).
26