Table of Contents
Advertisement
Settings
The Settings selection lets you elect whether to ignore the Disc switch, run the Masker
application, and/or hide the Status dialog box.
Ignore Disc Switch
If selected, causes the printer not to wait for the activation of the disc switch before
printing. This option is ignored when connected to a Desktop 4500 autoloader.
Hide Status Dialog
If selected, prevents the pop-up status dialog box from opening when a print job is
initiated. This option is ignored when connected to a Desktop 4500 autoloader.
Run Masker
When selected, the Rimage Raster Masker displays allowing you adjust the mask (non-
printable area) settings for the selected media type (
This works well when printing rectangle or square pictures on the disc and you do not
want the edges printed. If you print on the edges of a disc where there is not printable
surface, the ink will smear or run.
Standard Area Settings
etc.
lets you select the
Hub Settings
inner diameter settings.
Parameter Unit
0.1 mm.
let you adjust the standard outer and inner diameter settings,
Print On Hub
lets you switch between a unit of measure of times 1.0 mm or times
47
Standard CD/DVD 120 mm
feature and adjust the related outer and
User Guide Reference
only).
Advertisement
Table of Contents
