Connect Cables - Rimage CDPR3 Installation And User Manual

Connect Cables

The Desktop 4500 and the Liberty printer require one AC outlet. The PC requires two
AC outlets. The Desktop 4500 and Liberty printer features a universal power supply
that automatically switches between 120 and 220 Volts. The recorders in the Desktop
4500 are controlled through a Firewire host adapter card. Before connecting the cables,
the PC should have the Firewire card installed.
1. Do NOT power on the Desktop system after connecting the cables!
2. Connect the AC power cord to the autoloader.
3. Connect one end of the Firewire cable to the connector as shown on the rear of the
Desktop 4500 autoloader.
1 – Desktop 4500 Autoloader
4. Connect the opposite end of the Firewire cable to the Firewire card on the PC.
Either Firewire connection will work. Your computer may not look like this one,
but the Firewire card is the same.
2 – Firewire Cable
1 – Firewire Card
11
3 – AC Power Cord
2 – Firewire
Installation