Configuration Of Cd Module - Audiovox NEXTGEN Installation Manual

CONFIGURATION- con't.
CAUTION- DO NOT ATTEMPT TO INSERT A CD BEFORE THE RADIO
HAS BEEN PROPERLY CONFIGURED FOR CD. THIS
WILL CAUSE IMPROPER OPERATION AND MAY CAUSE
LOCK UP. IF LOCK UP OCCURS, REMOVE THE CD
MECHANISM FROM THE RADIO AND POWER THE UNIT
WITHOUT THE MECHANISM IN PLACE. IT IS ALWAYS
BEST TO CONFIGURE THE RADIO BEFORE OPERATING
A MODULE.

CONFIGURATION OF CD MODULE

Hold down the AUDIO ADJUST button for longer than 3 seconds. The
unit will enter the general configuration menu. Press manual "tune
down/track down" button until you see "IN--**" (where ** can equal NA,
LT, CD, or CG) is displayed. For proper CD operation, this setting
should be set to "IN-CD". If this setting is not set to "IN-CD", press the
manual "tune up/track forward" button until this appears on the display.
To exit configuration, press AUDIO ADJUST or let the menu timeout,
within about 5 seconds.
9