Richter Hut Combination 47 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General hints
A Surfacing requirements
This equipment should be installed on an
impact absorbing surfacing / loose fill material
that accords with EN 1176 and is adequate
for a maximum free height of fall of ≤ 1.50 m.
At the run-out of the slide we recommend
sand as loose fill material.
B Foundations
Please take into account the special sheet:
„Notes of the construction of foundations".
Special information
Certified by TÜV Süd Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical altera-
tions! For further information please call your
local agent.
Total weight:
Heaviest single part:
Largest single part:
Recommended assembly aids
Set of carpenter's tools
Set of ratchets
Set of spanners
Torx insert T 20, 25, 30, 40, 50
Rubber mallet
Attention!
During the assembly period (including the setting
of the concrete) it is not allowed to play on or put
any weight on the equipment in order to secure
stability during use after the assembly. Standard
concrete requires at least 2 weeks to set.
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY
1,180 kg
100 kg
0.20 x 1.20 x 2.50 m
INSTRUCTIONS ·
Hut Combination 47
Order No. 2.14700
Please pay particular attention to the as-
semlby instructions listed below.
Components
Number of parts: 11
Platform Hut
1 bundle: 4 side parts incl. 1 ladder, 2 floors,
2 walls, 1 bench, 1 bag of bolts,
1 bundle: 4 steel feet
Attachment frame attached to hut
Platform Hut with Roof
1 bundle: 4 side parts incl. 1 ladder, 2 floors,
2 walls, 1 bench, 1 bag of bolts,
1 bundle: roof parts
1 bundle: 4 steel feet
Attachment frame attached to hut
Bridge with Handrail and barrier
1 bundle: bridge, wooden handrail, barrier
Horizontal Bar for attachment
1 bundle: stand posts with steelfoot,
1 horizontal bar
Twin Swing - special
1 bundle: metal cross beam,
2 stand posts with steel feet
1 bundle: 2 swing seats with chains
Stainless Steel Slide, height 1.50 m
1 slide
1 ground anchor and bolts
ASSEMBLY INSTRUCTIONS
Assembly instructions
Order No.
3.13100
3.66364
3.13300
3.66364
L3.69700
3.19020
3.19210
page 1