Richter Climbing Stack 1 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment should be installed on an
impact absorbing surfacing / loose fill material
that accords with DIN EN 1176 / EN 1176 and
is adequate for a maximum free height of fall
of ≤ 2.00 m.
B Foundations
Please take into account the special sheet:
Notes on the construction of foundations.
Special information
Certified by TÜV Süd Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Required space including safety distances (EN 1176)
635 x 600 cm
Ground plan
scale 1:100
all dimensions in cm
Foundations
quality of concrete C25/30
2 items 50 x 50 x 50 cm
excavation depth 70 cm
1 item 60 x 60 x 30 cm
excavation depth 50 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY INSTRUCTIONS
point of reference
· ASSEMBLY
Climbing Stack 1
Order No. 4.21000
Components
Number of parts: 12
2 round timbers incl. steel feet
8 round timbers
1 bag of screws/bolts incl. 17 distance tubes
1 holding rope
Total weight:
heaviest single part:
largest single part:
INSTRUCTIONS
approx. 460 kg
approx. 75 kg
approx. 3.4 x 1.0 x 0.2 m
safety distances
foundations
Page 1