Table of Contents
Advertisement
DV-T27N-SJ 99.11.26 5:3 PM ˘ ` 25
Recording programs,
3
Press 2 to select Review/Cancel Programs. Press
MENU to cycle the programs.
4
When the program contents to be erased is
displayed, press CLEAR to cancel it.
5
Press MENU repeatedly to return to normal viewing.
One touch timer recording (OTR)
One touch timer records a program for a preset
recording time (30 minutes to 4 hours).
1
Be certain to do the tasks in the section, "Preparing
to record a program".
2
Use 0-9 or –CH/TRK+ to select the channel to
record.
3
Press REC/OTR to begin recording.
4
Continue to press REC/OTR to increase the time
length of the recording.
Press REC/OTR
Be certain when using
one time
manual or one-touch recording
two times
that your recording does not
conflict with timer recordings
three times
that you set up.
four times
five times
six times
seven times
eight times
•To stop the recording in progress, press and hold
STOP approximately 5 seconds.
25
continued
PROGRAM1 (ONE TIME)
Channel
06 Cable
Start Time 0 4
3 0 A M
:
End Time 0 5
3 0 A M
:
Start Date 07
10
00 Mon
/
/
Tape Speed EP
CLEAR Cancel
MENU For next program
To record
. normal (no recording time limit)
30 mins.
1 hour
1 hour 30 mins.
2 hours
3 hours
4 hours
normal (no recording time limit)
Using advanced features
Play the tape automatically
This feature allows the VCR to automatically start playing
when you insert a tape with the safety tab removed.
1
Press MENU to display the menu.
2
Press 4 to choose Functions
3
Press 1 to switch between ON and OFF
-
Select ON if you want a tape with its safety tab
removed to start playing automatically when the tape
is inserted.
-
Select OFF if you do not want a tape with its safety
tab removed to start playing automatically.
Switch the VCR to TV or VCR mode automatically
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode when the VCR is turned
on.
1
Press MENU to display the menu.
2
Press 4 to choose Functions
3
Press 2 to switch between ON and OFF
- Select ON if you want the VCR to switch to the VCR
mode when the VCR is turned on or a casssette is
inserted. This only applies if you connect the ANT.IN
and RF OUT jacks of your VCR and TV and watch
your VCR on channel 3 or 4 of your TV.
FUNCTIONS
1 Auto Play:
ON
2 Auto TV/VCR:
ON
3 Index Search
4 Go-To Search
MENU Exit
26
Advertisement
Table of Contents
