Playcore UltraSite ActionFit Kids Hero Zone UP273 Manual

Items listed below Hardware Complete line are included with Hardware Complete Number
Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store
Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any
Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end
protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement.
Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.
Note: Loctite (supplied by others) should be used on any non-patch hardware.
INSTALLATION INSTRUCTIONS:
1. Determine where to place the Hero Zone. Refer to order Top View.
2. Dig footing holes. Refer to Plan and Elevation Views.
3. Attach the Usage Warning Label - Hero Zone to the Usage/Warning Label Sign Post and place in footing hole. Refer to Finished
Assembly View and Plan View.
4. Attach Hero Zone Step 1's and Hero Zone Step 2's to the Hero Zone Panels along the bottom row of 1/2" holes. See Detail 1288.
5. Attach assembled Hero Zone Panels to Hero Zone Frames. Start with interior holes of Hero Zone Panels, then field drill holes around
perimeter. See Detail 1262.
6. Attach Hero Zone Frames to Hero Zone Pipe 5's. See Detail 1079.
7. Attach Hero Zone Frames to Hero Zone Pipe 4's. See Detail 1079.
8. Place assembled Hero Zones into footing holes.
9. When the Hero Zone are plumb and level, tighten all fasteners and pour concrete footings within 4" to the top and taper away from
supports to allow drainage. Allow to cure at least 48 hours before use.
Issued/Revised: 4/25/2024
800.458.5872
UP273 HERO ZONE
DESCRIPTION
USAGE/WARNING LABEL SIGN POST
HERO ZONE FRAME
HERO ZONE PANEL
HERO ZONE PIPE 4
HERO ZONE PIPE 5
HERO ZONE STEP 1
HERO ZONE STEP 2
HARDWARE COMPLETE
3/8" x 2" P.B.H.C.S. w/PATCH
3/8" x 2 1/4" P.B.H.C.S. w/PATCH
3/8" x 2 3/4" P.B.H.C.S. w/PATCH
3/8" x 3" P.B.H.C.S. w/PATCH
3/8" LOCK WASHER
3/8" BARREL NUT
1/2" ANCHOR ROD
USAGE WARNING LABEL - HERO ZONE
Unless Otherwise Specified, All Units of Measure are Each
Promptly cut-off flush, file smooth, and treat to prevent corrosion.
Parts List
QTY PART NUMBER
1 212030
2 408093
2 408097
4 408099
4 408101
8 408113
2 408114
1 408103
8 812055
16 812056
12 812058
24 812059
60 817334
60 804804
8 135038
1 408102
actionfitoutdoors.com 1