Rear Panel - Emerson EWH100F Owner's Manual

Rear Panel

1
1 AC Power Cord: Connect to a standard AC outlet to
supply power to this unit.
2 S-VIDEO IN (LINE 1): Connect the S-Video output
of an external equipment here using a commercially
available an S-Video cable.
3 COMPONENT VIDEO OUT (DVR / DVD):
Connect the component video input of a TV monitor,
AV receiver, or other equipment here using a commer-
cially available component video cable.
4 AUDIO IN (LINE 1): Connect an external equip-
ment here using a supplied audio cable.
5 AUDIO OUT: Connect the audio input of a TV moni-
tor, AV receiver, or other equipment here using the
supplied audio (L / R) cable.
6 TV ANTENNA IN: Use to connect an antenna.
7 TV ANTENNA OUT: Use to connect an antenna
cable to pass the signal from the TV ANTENNA IN to
your TV monitor.
Before You Start
Functional Overview (Cont'd)
2 3
DVR/DVD
COMPONENT
VIDEO OUT
DVR/DVD
S-VIDEO
DIGITAL AUDIO
AUDIO OUT OUT
DVR/DVD/VCR
L
COAXIAL
IN
R
OUT
DVR/DVD
12 11 10
8 VIDEO OUT: Connect the video input of a TV moni-
tor, AV receiver, or other equipment here using the
supplied video cable.
9 VIDEO IN (LINE 1): Connect the video output of an
external device here using the supplied video cable.
10 S-VIDEO OUT (DVR / DVD): Connect the S-Video
input of a TV monitor, AV receiver, or other equipment
here using a commercially available S-Video cable.
11 AUDIO OUT (DVR / DVD): Connect the audio
input of a TV monitor, AV receiver, or other equipment
here using the supplied audio (L / R) cable.
12 COAXIAL DIGITAL AUDIO OUT (DVR / DVD):
Connect an AV receiver, Dolby Digital decoder or oth-
er equipment with a coaxial digital input jack with a dig-
ital coaxial cable.
Note: Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
4 5 6
DVR/DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
Y L L
P /C R R
B B
VIDEO IN VIDEO OUT
P /C
R R
OUT
9 8 7
11