Playback Function - Emerson EWV403 Owner's Manual

To Add/Delete Channels
When the VCR automatically program the tuner to scan only the
channels you receive in your area, some channels may be
skipped due to weak signal. You can manually add the channel
in the VCR memory.
Press [MENU] until the main menu
1
appears.
2 Select "CHANNEL SET UP" by
pressing [PLAY] or [STOP]. Then,
press [F.FWD].
Select "MANUAL SET UP" by pressing [PLAY] or
3
[STOP]. Then, press [F.FWD].
4 Enter the desired channel number by pressing [PLAY]
or [STOP].
5 Add or Delete it from memory by pressing [F.FWD] or
[REW] so that "ADD" or "DELETE" flashes on the TV
screen accordingly.
6 Exit the Preset mode by pressing [C.RESET/EXIT].
To Change the On-Screen Language
Press [MENU] until the main menu appears.
1
2 Select "LANGUAGE SELECT" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
3 Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by
pressing [PLAY] or [STOP]. Then, press
[C.RESET/EXIT].
• If you accidentally select Spanish or French and need
English: Press [MENU] and choose SELEC. IDIOMA, or
SELECTION LANGUE. Press [F.FWD], and select ENG-
LISH. Finally, press [C.RESET/EXIT].
Clock Set Up
Select main menu by pressing [MENU].(If the clock is not
1
set, the CLOCK SET menu appears first. In this case, fol-
low step [3].)
Select "CLOCK SET" by pressing [PLAY] or [STOP].
2
Then, press [F.FWD].
Set the clock.
3
Set the month Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Set the day Press [PLAY] or [STOP]repeatedly.
Then, press [F.FWD].
Set the year Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
The day of the week will appear automatically.
Press [PLAY] or [STOP] repeatedly.
Set the hour
Then, press [F.FWD].
Press [PLAY] or [STOP] repeatedly.
Set the minute
Then, press [F.FWD].
Press [PLAY] or [STOP]
Set the AM
repeatedly.
or PM
• To go back one step, press [REW].
Start the clock by pressing [C.RESET/EXIT] or [F.FWD].
4

PLAYBACK FUNCTION

Normal Playback
1
- MENU -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
2
CLOCK SET
LANGUAGE SELECT
3
• Tracking adjustment will be set automatically (Digital
Tracking function) when you start playback. To adjust the
tracking manually, press [CHANNEL
• You cannot manually adjust the tracking of a Still picture.
However, you may press [CHANNEL
remove vertical jitter in a Still picture.
• When a tape has reached the end, the VCR will rewind the
tape to the beginning, eject the tape, and turn off the VCR
automatically.
4
Counter Reset
• You can reset the counter by pressing [C.RESET/EXIT] on the
remote control
Still / Slow
You can freeze the picture on TV screen by pressing
[PAUSE/STILL] during playback.
• You can advance the picture by one frame at a time by press-
ing [PAUSE/STILL] during the still mode.
• If the picture begins to vibrate vertically during the still mode,
stabilize the picture by pressing [CHANNEL
• If the picture is distorted or rolling vertically, adjust the vertical
hold control on your TV, if equipped.
You can see the slow motion by pressing [SLOW] during play-
back or the still mode.
• If the noise bar appears on the TV screen, you can reduce it
by pressing [CHANNEL
• After the VCR has been in Still/Slow mode for 5 minutes, it will
stop automatically to protect the tape and the video head from
damage.
• To return playback, press [PLAY].
Auto Repeat Playback
This feature allows you to play a tape over and over.
1
2
3
• If the on-screen menu still remains, press [C.RESET/EXIT]
• To cancel the Auto repeat mode, press [F.FWD] at step [3]
CLOCK SET
MONTH DAY YEAR
Search Functions
03 / 17 MON 2003
HOUR MINUTE AM/PM
05 : 40 PM AM
Picture Search
PM
If you want to skip or repeat a scene during playback, press
[F.FWD] or [REW].
• Press it again and the VCR will now search in super high
speed. (in the LP/SLP modes only)
– 4 –
Insert the prerecorded tape. The VCR will
turn on. If the safety tab has been removed,
the VCR will start playback automatically.
Turn on the TV and set the TV to channel 3. If channel
3 is already occupied for broadcasting, change the RF out-
put to CH 4, and change the TV channel to CH4.
(See "RF Output Channel" on page 3 for the detail.)
Begin playback by pressing [PLAY].
To stop playback, press [STOP].
(
Select main menu by pressing [MENU].
Select "AUTO REPEAT" by pressing [PLAY] or [STOP].
Begin auto repeat playback by pressing [F.FWD] so that
[ON] appears next to "AUTO REPEAT".
to exit the menu.
so that [OFF] appears next to "AUTO REPEAT".
( )
] on the VCR.
( )
] on the VCR to
( )
].
)
].
EN