Reset To The Default Setting (Except For Parental Setting); Information; Troubleshooting Guide - Sylvania DVL515SL Owner's Manual

Reset to the Default Setting (Except for PARENTAL Setting)

1
1
STOP
TV SETUP
DVD SETUP
<SETUP MENU>
QUICK SETUP
PLAYER MENU ENGLISH
TV ASPECT 4:3 LETTER BOX
DOLBY DIGITAL BITSTREAM

Troubleshooting Guide

If the DVD/CD player does not perform properly when operated as instructed in this Owner's Manual, check the DVD/CD
player consulting the following checklist.
Problem
No power
No sound or picture
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
No audio at digital output
No DTS audio is output
Picture freezes momentarily
during playback
Disc can't be played
No return to start-up screen when disc is removed –Reset the DVD/CD player by switching the DVD/CD player off, then on again.
The DVD/CD player does not respond to
the remote control
Buttons do not work or the DVD/CD player stops
responding
The DVD/CD player does not respond to some
operating commands during playback
The DVD/CD player cannot read
CDs/DVDs
Angle does not switch
Playback does not start when the title is selected
The password for rating level has been forgotten
Disc cannot be inserted
Disc cannot be taken out
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's Manual
for more details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
2
2
or
ENTER ENTER ENTER
Select "INITIALIZE".
QUICK SETUP
PLAYER MENU ENGLISH
TV ASPECT 4:3 LETTER BOX
DOLBY DIGITAL BITSTREAM
OK

Information

Solution
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.(See Connection to a TV)
–Set PROGRESSIVE correctly. Turn it on only if your TV has
Progressive Scan and you are using the Component Video connec-
tions between the DVD/CD player and the TV. Disable Progressive
Scan for all other connections. (See page 6)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the DVD/CD player directly to the TV.
–Connect the DVD/CD player directly to the TV.
–Make sure the disc is compatible with the DVD/CD player.
–Check if the INTERLACE/PROGRESSIVE mode is set correctly. See page 6.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches
your receiver capabilities.
–This DVD/CD player does not support DTS audio. This is not a malfunction.
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Clean the disc.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this DVD/CD player.
–Handle a disc with special care so that it does not have fingerprints,
scratches, or dusts on its surface.
–Aim the remote control directly at the sensor on the front of the DVD/CD player.
–Press [DVD] on the remote control. Then try other DVD features.
–Reduce the distance to the DVD/CD player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises.
Then, turn the volume up. If you hear some signal sound from the radio
by pressing buttons on the remote control, the remote control is working.
–To completely reset the DVD/CD player, unplug the AC
cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD/CD player for repair.
–The angle cannot be switched for DVDs which do not contain multiple
angles. In some cases multiple angles are only recorded for specific scenes.
–Check the "PARENTAL" setting.
–Enter the default password "4737", then your forgotten password
will be cleared.
–Check if any disc is already in.
–Press and hold [EJECT A] on the DVD/CD player for more than 5 seconds.
– 17 –
3
3
or
ENTER ENTER ENTER
Select "YES".
INITIALIZE
Initialize?
NO
YES
ENTER
–Ensure the disc label is facing up.
4
4
To exit
the menu
TV SETUP
DVD SETUP
Hint
Hint
Press
twice. • When you cancel
to initialize at step
3), select "NO".
EN