JWM WM-5000P4D User Manual page 11

11. User Flow
1) Make a sketch of the checking places that the guard needs to
check.
2) Install checkpoints on each checking place.
*The round shape checkpoint can be stuck or screwed on the wall.
*For the cylinder glass checkpoint, make a hole in the wall, and then
put it
inside and cover it.
3) Install software and make settings in software
4) The guard uses the reader to starts to patrol, he needs go to each
checking place and uses the reader to scan checkpoints installed on
the
wall.
5) The guard will press the reader left button for sending data （or
send data automatically）to the control center. The reader also can
transfer the data by the USB cable.