• Strictly follow the installation, operation, and configuration instructions in this document. The manufacturer shall not be liable for equipment damage or personal injury if you do not follow the instructions. For more warrant information, please visit:https://en.goodwe.com/warranty Safety Disclaimer WARNING •...
Check Before Power ON Check Item The product is firmly installed at a clean place that is easy to operate. The power cable, ethernet cable, and communication cables are connected correctly and securely. Cable ties are intact, routed properly and evenly. The input signal status are correct and the input power parameters are within the operating scope of the equipment.
EU Declaration of Conformity GoodWe Technologies Co., Ltd. hereby declares that the inverter with wireless communication modules sold in the European market meets the requirements of the following directives: • Radio Equipment Directive 2014/53/EU (RED) • Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS) •...
Product Introduction Parts Indicator Ethernet ports (ETH1/2) PT ports (PT100 PT1000) AI ports AI ports 12V output power port (AI_0-12V) (AI_0/4-20mA, reserved) (12V GND) CAN ports DO ports (DO1/2) DI ports (DI) (CAN 1/2, reserved) MicroSD card slot RS485 ports USB port (USB) (MicroSD) (RS485 1-4)
Installation Packing List N=Quantity depends on the product model. Space Requirements Children no touch IP20 0%~95%RH...
Page 7
ALT: 5000m Wall mounting 1.5-2mm φ: 6mm D: 30mm 70mm 0.8N·m Rail Mounting 0.6N·m Table Mounting • Mount the device on a horizontal table. Place it properly to avoid the device slipping and causing damage. • Do not place the device in a place where it can be easily touched to avoid signal interruption caused by accidental touching.
Connect the power adapter cable to the device and the AC socket side. Turn on the switch on the AC socket side. Power OFF Disconnect the power adapter from the device and AC socket. Commissioning via WEB For more detailed instructions about WEB commissioning, scan the QR codes below. Ezlogger3000C User Manual...
Page 18
GoodWe Website GoodWe Technologies Co.,Ltd. No. 90 Zijin Rd., New District, Suzhou, 215011, China www.goodwe.com service@goodwe.com 340-01005-00 Local Contacts...
Need help?
Do you have a question about the EzLogger3000C and is the answer not in the manual?
Questions and answers