Silvercrest SWKK 100 A1 Operation And Safety Notes page 21

List of pictograms used
Disposal according to the EC Waste
Electrical and Electronic Equipment
Directive (WEEE)
Heated Electric Cushion
Introduction
Please familiarise yourself with the heating
pad before getting started and using it
for the first time. To do so, please care-
fully read the following operating instructions and
the important safety information. Use the heating
pad only as described and for the stated areas of
use. Keep these instructions in a safe place. If you
pass the heating pad on to anyone else, please en-
sure that you also pass on all the documentation.
Intended use
This heating pad is intended for applying heat to the
human body. This heating pad is not suitable for use
in hospitals or for any other commercial use. In par-
ticular it must not be used for babies or infants, per-
sons who are insensitive to heat, helpless persons,
or animals. Any use other than that described above
or modification of the heating pad are not permissible
and may lead to injury and/or damage to the heat-
ing pad. The manufacturer assumes no liability for
damage arising out of improper use.
Parts description (see fig. A
and B)
Control unit
1
Function indicator
2
Cover with built-in heating pad
3
Zip fastening
4
Inner cushion
5
Plug-in connector
6
07.101.476_SWKK100_2024-05-01_01_IM1_Lidl_LB8_OS_content_Teil-1.indd 19 07.101.476_SWKK100_2024-05-01_01_IM1_Lidl_LB8_OS_content_Teil-1.indd 19
Labelling to identify the packaging
material.
A = material abbreviation,
b
B = material number:
a
1‒7 = plastics, 20‒22 = paper
and cardboard
Scope of delivery
Please check immediately on unpacking that the
delivery scope is complete and that the heating pad
is in perfect condition.
1 heated electric cushion
1 inner cushion
1 control unit/plug-in connector
1 set of instructions for use
Technical data
Model: SWKK 100 A1
Type: P10 cushion
Power supply: 220–240 V/50–60 Hz
Power input: 100 W
Dimensions: approx. 40 x 30 cm
(with inner cushion)
Protection class: II/
Electric field strength: max. 5000 V/m
Magnetic field strength: max. 80 A/m
Magnetic flux density: max. 0.1 milli-Tesla
Material:
Top/bottom: 100 % polyester
Manufacturer:
MGG Elektro GmbH
Bahnstr. 16
40212 Düsseldorf
GERMANY
GB/IE 19
24.06.24 08:54 24.06.24 08:54