Keep the battery out of the reach of children. Information in this publication is subject to change without notice. NEC is a registered trademark and Versa is a U.S. registered trademark of NEC Corporation and/or one or more of its subsidiaries. Both are used under license. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Features The NEC VersaBay IV 6-cell secondary battery can be installed in the VersaBay IV slot, for use in addition to the primary battery. See the following figure for features. The VersaBay IV secondary battery A – Battery Connector B – Notch for Latch/Eject Lever...
Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Flip the latch to the open position. Align the battery in the NEC VersaBay IV slot and push it in until it fits securely into the bay.
For directions on getting a detailed battery status, see the section, “Determining Battery Status.” Determining Battery Status Your NEC Versa system provides tools to help you keep track of the primary and secondary battery power level. If your system is configured (default setting) to display the Power icon on the taskbar, an electrical plug appears when the system is connected to an AC power source or a battery icon displays when the system is not connected to an AC power source.
Take extra precautions to keep a leaking battery away from fire. There is a danger of ignition or explosion. Battery Disposal The VersaBay IV 6-cell secondary battery is made of lithium ion (Li-Ion). Do not place used batteries in your regular trash. The batteries must be collected, recycled, or disposed of in an environmentally approved manner.
819-200746-000 04/2001 *819-200746-000* 6 NEC VersaBay IV 6-Cell Secondary Battery...