Reassembling The System - NEC VERSA SX HARD DISK DRIVE Upgrade Manual
Upgrading the hard disk drive
Hide thumbs
Also See for VERSA SX HARD DISK DRIVE:
- User manual (196 pages) ,
- Service and reference manual (117 pages) ,
- Product manual (46 pages)
Table of Contents
Advertisement
T
Hold the drive bracket and slide the new drive into the bay at an angle to ensure that the
two metals tabs align with the notches in the bay.
T
Lower the drive into the bay and press firmly on the hard drive label's black dot to
engage the connectors.
T
Replace the screw to secure the hard disk drive.
Reassemble the system as follows. See the illustration following these instructions.
9.
T
Reposition the keyboard and align the 4 metal tabs on the front with the grooves in the
system.
T
With the keyboard at a slight angle, reseat the keyboard in its original position. Be sure
that the lip on the right side of the keyboard (when facing you) slides under the small
plastic tab on the system.
4 Upgrading the Hard Disk Drive on the NEC Versa SX
Advertisement
Table of Contents
Need help?
Do you have a question about the VERSA SX HARD DISK DRIVE and is the answer not in the manual?