NEC VERSA SX HARD DISK DRIVE Upgrade Manual page 5

The following illustration identifies the location of the metal tabs on the keyboard, and the
grooves and small plastic tab on the system.
A – Metal Tabs (on the keyboard)
C – Plastic Tab (on the system)
Note
If the lip on the right side of the keyboard (facing you) does not slide under the small
plastic tab on the system, the keyboard will not sit properly. This could damage the unit.
T
Slide the keyboard retainer back to its original position.
Power on your NEC Versa.
10.
Note
For hard disks, 12-GB or larger, the restore process creates two partitions, not a single
partition as shipped from the factory. If you want to create a single partition for your hard disk, run
the Partition Magic software (version 4.1 or higher) after the restore process completes. Partition
Magic can either be downloaded from a URL address provided by NECC Customer Support, or
installed from the Application and Driver CD that ships with your system (not available on all
CDs). See the document, Restoring the 12- and 18-GB Hard Disk Drive," which shipped with
your 12-GB or larger hard disk, for detailed instructions on using the Product Recovery CD and/or
creating a single partition with Partition Magic.
To restore your NEC Versa to its original shipping state, refer to Chapter 7 of the NEC Versa SX
User's Guide for detail instructions about using the Product Recovery CD. Use Partition Restore
to partition the drive into two partitions: the first partition must be 6 GB and the second partition
will be the remaining drive space.
B – Metal Grooves (on the system)
Upgrading the Hard Disk Drive on the NEC Versa SX 5