Akai PRO-A200D Service Manual page 25

I. SPECIFICATIONS
POWER AMPLIFIER SECTION
8ohms
RATED POWER OUTPUT 40Hz to 20kHz 35W/0.3%
POWER OUTPUT (BY FTC) 20Hz to 20kHz 35W/0.3%
FRENCH NORMAL (80hms) 63Hz to 12.5kHz 40W/0.7%
DIN _ 1kHz 40W/0.7%
MUSIC POWER (BOTH CHANNELS) 180W
POWER BANDWIDTH (IHF —3dB, 80hms) 10Hz to 40kHz (0.5%)
S/N (THF-A) PHONO 70dB
AUX 90dB
RESIDUAL NOISE (8ohms) 0.5mV
CHANNEL SEPARATION (IHF, 1kHz) 50dB
DAMPING FACTOR (1kHz, 80hms) 30
REQUIRED SPEAKER IMPEDANCE A orB 8 to l6ohms
AandB- 8 to l6ohms
PRE AMPLIFIER SECTION
INPUT SENSITIVITY/IMPEDANCE PHONO 2.0mV/47kohms
CD/VTR 250mV/47kohms
FREQUENCY RESPONSE
PHONO (RIAA DEVIATION) +0.5dB
TUNER, AUX, TAPE 5Hz to 100kHz (—3dB)
GRAPHIC EQUALIZER
TYPE 9 bands
CENTER FREQUENCY 63Hz/125Hz/250Hz/500Hz/1kHz/2kHz/4kHz 8kHz 16kHz
CONTROL RANGE +10dB
* For improvement purposes, specifications and design are subject to change without notice.
ll. DISMANTLING OF UNIT
In case of trouble, etc. necessitating dismantling, please dismantle in the order shown in the photographs. Reassemble
in reverse order.
UPPER COVER
S
E SCREWS
SERVICE MANUAL
24