TP-Link VX420-G2H Quick Setup Manual page 9

Set up nbn FTTP
®
1 Connect the power cable from your modem's Power Port to an electrical outlet.
2 Connect an Ethernet cable from your modem's blue WAN port to the UNI-D1 port on your NBN Connection Box. If UNI-D1 doesn't work,
try each UNI-D port.
Make sure the electrical outlet for your modem is on, and press the modem's ON/OFF button.
3
4 Allow 20 minutes for your modem to boot up and connect automatically.
5 Check the lights on your modem. If the Internet light is green, you can start connecting your devices and getting online.
Power DSL 4G
OFF
6 To plug in additional devices via Ethernet cable, simply connect the Ethernet cables to any of the four yellow LAN ports on your modem.
7 Turn to page 12 to continue your setup.
DES-19417_VF_SMG_QSG_TPLink_Modem_NOV24.indd 9 DES-19417_VF_SMG_QSG_TPLink_Modem_NOV24.indd 9
Internet 2.4GHz 5GHz WAN LAN 1
ON
LAN 2 LAN 3 LAN 4 Phone WPS USB
9
3/12/2024 11:09 AM 3/12/2024 11:09 AM