NEC VERSA 4000 Manual page 50

1. Press the Suspend button on the NEC Versa. Check that
the system is in Suspend mode.
!
Make sure the NEC Versa is in Suspend mode (look
for the moon icon on the Status Bar) or powered off
whenever you add or remove the keyboard. Con-
necting an external keyboard to the system in Op-
erating mode can damage the keyboard controller
chip.
2. Connect the keyboard cable connector to the keyboard
port on the system.
Keyboard/Mouse Port
Press the Suspend button again to resume Active mode.
3.
The system immediately recognizes the keyboard.
CAUTION
Connecting an external keyboard
Using the Hardware 2-27