NEC VERSA 4000 Manual page 41

8. Replace the cover as follows:
Align the tabs on the drive cover with the slots on the
system chassis.
Lower the cover onto the chassis.
Slide the cover to the right, making sure the second
set of tabs at the back of the cover slide under the
chassis frame.
Push the cover until it snaps into place.
Notch
Turn the system over and power on. The system auto-
9.
matically configures the new memory. The Setup sum-
mary screen will display the new amount.
2-18 Using the Hardware
Tabs (not shown)
Tab
Replacing the drive bay cover
Notch