8 Replace the memory module cover and tighten the screws.
NOTICE:
may damage your computer.
9 Replace the keyboard. See "Keyboard" on page 125.
10 Replace the hinge cover. See "Hinge Cover" on page 123.
NOTE:
replacement procedure.
11 Insert the battery into the battery bay, or connect the AC adapter to your computer and an
electrical outlet.
12 Reinstall the hard drive. See "Hard Drive" on page 108.
13 Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information.
To confirm the amount of memory installed in the computer, click the Start button, click Help and
Support, and then click Computer Information.
118
Adding and Replacing Parts
1
If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close
Ensure that you replace the two screws inside the battery bay as part of the hinge
tab in connector slot
1