Dell XPS 140M Owner's Manual page 110

1 pull-tab
5 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
damage the connector.
6 Seat the new hard drive into the bay, and then slide it into the connector by sliding it away
from the screw holes until it is fully seated.
7 Replace the cover and tighten the screws.
8 Install the operating system for your computer. See "Restoring Your Operating System" on
page 99.
9 Install the drivers and utilities for your computer. See "Reinstalling Drivers and Utilities" on
page 97.
110
Adding and Replacing Parts
1
2
Use firm and even pressure to slide the drive into place. If you use excessive force, you may
hard drive
2