Subscribe to Our Youtube Channel
Related Manuals for Truper PRO LIRI-20A
Summary of Contents for Truper PRO LIRI-20A
- Page 1 Manual Cordless random orbit sander 20 V Applies for: Codes Models 102863 LIRI-20A 103261 LIRI-20AS LIRI-20A Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Contents CAUTION Technical data Power requirements To get the most out of the tool, extend its lifespan, claim the General safety warnings for electric tools warranty if necessary, and avoid serious risks or injuries, please Safety warnings for the use read this manual thoroughly of cordless random orbit sanders before using the tool. -
Page 3: Technical Data
The construction class of the tool is: Class III. The construction class of the charger is: Reinforced insulation. WARNING If the power cable is damaged, it must be replaced by the manufacturer or an Authorized TRUPER Service Center to prevent any risk of electric shock or significant accidents. -
Page 4: General Safety Warnings For Electric Tools
Use and care of the battery-powered tool shoes, helmet, and ear protection in appropriate conditions significantly Only recharge with the charger specified by TRUPER. reduces the risk of personal injury. Using the charger specified for one battery with another battery can cause a fire hazard. -
Page 5: Safety Warnings
The battery level is not sufficient. In this case, remove the battery from the tool and charge the battery. Batteries and charger DANGER • Use only the included TRUPER charger to charge the Battery charging tool's battery. Using another charger can cause a fire or injury risks. DANGER •... -
Page 6: Parts
Parts Handle On/off switch Variable speed control Dust extraction duct Polishing Base with hook and loop attachment 1 Sponge Dust extraction Battery 3 Sanding adapter release button disc Dust bag Battery connection terminals Battery Charge *Battery and charger only in LIRI-20A model indicator Charger Preparation... -
Page 7: Sanding Disc Selection
Preparation Sanding disc selection Grit Type • Available grits range from very coarse to very fine. 60 or less Very coarse • Coarse grit is used for rough surfaces, medium grit for light 80-100 Coarse work, and fine grit for finishing. 120-150 Medium •... -
Page 8: Startup
Startup Power on To turn on your sander (C), press the protective cover over the switch to the position marked "I". To stop your sander, press the protective cover to the position marked "0". Speed control With the variable speed control (D), you can select the required speed (even while it is operating). -
Page 9: Maintenance
• Repair or replacement of machine parts should only WARNING When using compressed air to clean be performed at an Authorized TRUPER Service particles, ALWAYS wear safety glasses with side shields or Center. Service and maintenance performed by a face shield; if a large amount of dust is expelled, also unqualified persons can be dangerous and may cause use a dust mask. -
Page 10: Troubleshooting
Troubleshooting Problem Cause Corrective action The sander loses • Low battery. • Charge the battery. efficiency. The battery is leaking. • Normal minor dripping in extreme • Immediately clean any liquid from skin temperatures or after heavy use. or clothing with water and soap. •... -
Page 11: Authorized Service Centers
In the event of any problem contacting an Authorized Truper Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-873 to get information about the nearest Service Center. -
Page 12: Warranty Policy
It includes the costs of transportation of the product that derive from its fulfillment of its service network. . Phone number 800-018-7873. Made in China. Imported by TRUPER, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.
Need help?
Do you have a question about the PRO LIRI-20A and is the answer not in the manual?
Questions and answers