Mcafee's Virus Scan For Windows Nt; Enabling The Adaptec Scsi Board (Scsi Models Only) - NEC POWERMATE PRO2180 - SERVICE MANUAL 1997 Service Manual

3. Click on the Devices tab selection in the Multimedia Properties dialog box and
then click on the "Add" button.
4. In the Add dialog box, select "MIDI Synthesizer" and then press OK.
When prompted, click on "Restart the System Now".
5.

MCAFEE'S VIRUS SCAN FOR WINDOWS NT

Follow this procedure to install the McAfee's Virus Scan.
1. Log in as administrator and use the Windows NT password to continue with the
installation.
2. Insert the McAfee Virus Scan diskette into drive A:.
From Program Manager, press the "Start" button, then select "Run."
3.
Type
4.
A:\SETUP.EXE
Follow the instructions in the setup program. Select "Typical" (the default) for the
5.
setup type. Press "Skip" for Service Account Information.
6. When the program asks you if you want to view "WHATNEW.TXT", click on
"Yes" and carefully read the file.

ENABLING THE ADAPTEC SCSI BOARD (SCSI MODELS ONLY)

The default setting for the Adaptec SCSI Board does not provide optimum performance.
Use the following steps to change the setting.
1. Save any current open application files. Close all open applications and reboot the
system.
As the system reboots, watch for the Adaptec SCSI Banner and press CTRL A
2.
when prompted. This launches the Adaptec SCSI setup utility.
In the Options screen, select "Configure/View Host Adapter Settings" and press
3.
"Enter."
Select "Advanced Configuration Options" and then scroll down to "Support for
4.
Ultra SCSI Speed." Set this selection to "Enabled."
5. Press "Esc" twice and follow the instructions on the screen to save changes and
exit the setup utility. Reboot the system.
and click "OK."
NOTE: If you do not have a computer
configured with the SCSI interface, skip this
section.
Setup and Installation 2-3