Table of Contents
Advertisement
If the diskette drive busy lamp does not light when you
load the diskette, try a different diskette. If this loads, the
problem is in the software.
T
Non-System Disk or Disk Error message displayed.
If you are trying to boot from the diskette drive, insert a
diskette with system files into drive A.
If a bootable diskette does not boot, use the Setup Utility
to verify that the initial boot parameter is set to diskette
drive A and not a hard disk.
Monitor Problems
Check the following problems to see the possible cause and
solution.
T
Monitor screen is dark or the display is hard to
read.
Check that the monitor is on.
Check that the monitor power cable is connected to the
monitor and a power outlet, the monitor signal cable is
connected to the system, and the brightness and contrast
controls are adjusted.
Press the space bar or move the mouse to take the
system out of the power management mode.
T
Distorted image appears on your monitor screen.
Adjust the monitor's video controls. If this does not help,
turn the monitor off for several seconds, then back on.
T
There is constant movement on the screen.
A magnetic field is affecting your monitor. Move any
devices (fan, motor, another monitor) that generate
magnetic fields away from your monitor.
8-4 Solving System Problems
Advertisement
Table of Contents
