Advertisement
Installing LANDesk Client Manager
When installing LANDesk Client Manager, do not select the following components:
T
CMI
T
Alert on LAN.
Your system does not support CMI and Alert on LAN.
Selecting the CMI and Alert on LAN components causes the system to hang at the message
"New hardware found, Intel 82801AA SMBus controller Windows is installing the software for
your system." This condition requires the reinstallation of your operating system and the
software that shipped on your hard drive.
Detecting Chassis Intrusion
LANDesk Client Manager does not detect chassis intrusion due to incompatibility between
LANDesk Client Manager and the hardware monitoring ASIC component on the system board.
If chassis intrusion in BIOS Setup is enabled and someone has tampered with the chassis, the
BIOS displays the message "Your Computer Case Had Been Opened" during system bootup. To
view the message, press the
Viewing PCI Slot Information
The system board information in the inventory section of LANDesk Client Manager shows only
three PCI slots instead of four PCI slots. The status of the PCI slots is always reported as
unknown. This PCI reporting is due to the incompatibility between LANDesk Client Manager
and the hardware monitoring ASIC component on the system board.
Displaying Contents & Indexes
See the following conditions about displaying "Contents & Indexes."
For a System with Windows 98 or Windows NT
The tab descriptions for "Contents & Indexes" might not appear. This is a LANDesk Client
Manager issue. We recommend that you use the user manual located on your system at
c:\programs\files\intel\wwwroot\help\enuldcmc & enuldcma
and ENULDCMA is for the Administrator.
For a System with Windows 2000
The tab descriptions for "Contents & Indexes" might not appear and the information in the
Contents might not appear. Clicking on the "Exclamation Point Icon" to view the message
displays the following error message:
Problems with this Web page might prevent it from being displayed properly or functioning
properly
This is a LANDesk issue. We recommend that you use the user manual located on your system
at
c:\programs\files\intel\wwwroot\help\enuldcmc & enuldcma
Client and ENULDCMA is for the Administrator.
6 NEC PowerMate ES Series Release Notes
Esc
key. The NEC logo bitmap closes and the message appears.
. ENULDCMC is for the Client
. ENULDCMC is for the
NEC PowerMate ES Series
Release Notes
455-00305-001
7/2000
Advertisement
