Table of Contents
Advertisement
Intel LANDesk Client Manager Issues
The following sections describe Intel
Note
In addition to the following issues, please review LANDesk Client Manager Software
Release Notes in the Help section of LANDesk to view some of the known issues and ways to
work around them.
Installing LANDesk Client Manager
When installing LANDesk Client Manager, do not select the following components:
!
CMI
!
Alert on LAN.
Your system does not support CMI and Alert on LAN.
Selecting the CMI and Alert on LAN components causes the system to hang at the message
"New hardware found, Intel 82801AA SMBus controller Windows is installing the software for
your system." This condition requires the reinstallation of your operating system and the
software that shipped on your hard drive.
Detecting Chassis Intrusion
LANDesk Client Manager does not detect chassis intrusion due to incompatibility between
LANDesk Client Manager and the hardware monitoring ASIC component on the system board.
If chassis intrusion in BIOS Setup is enabled and someone has tampered with the chassis, the
BIOS displays the message "Your Computer Case Had Been Opened" during system bootup. To
view the message, press the
Viewing PCI Slot Information
The system board information in the inventory section of LANDesk Client Manager shows only
three PCI slots instead of four PCI slots. The status of the PCI slots is always reported as
unknown. This PCI reporting is due to the incompatibility between LANDesk Client Manager
and the hardware monitoring ASIC component on the system board.
Displaying Contents & Indexes
See the following conditions about displaying "Contents & Indexes."
Systems with the Microsoft Windows 98 or Windows NT Operating System
The tab descriptions for "Contents & Indexes" might not appear. This is a LANDesk Client
Manager issue. We recommend that you use the user manual located on your system at
c:\programs\files\intel\wwwroot\help\enuldcmc & enuldcma
and ENULDCMA is for the Administrator.
®
®
LANDesk
Client Manager issues.
key. The NEC logo bitmap closes and the message appears.
Esc
NEC PowerMate ES Series Release Notes 7
. ENULDCMC is for the Client
Advertisement
Table of Contents
