Advertisement
8.
Connect the drive cables as follows.
T
Locate the unused IDE connector on the CD-ROM IDE cable.
T
Align the pin 1 edge of the IDE cable as shown in the the following figure and connect
the IDE cable to the Zip drive.
T
Connect an unused power cable connector to the Zip drive power connector.
Replace the front panel and system unit cover (see your PowerMate user's guide).
9.
4 Installing the Zip Drive
Connecting drive cables
A – Pin 1 Edge of IDE Cable
B – Power Cable
C – Zip Drive
455-00325-000
11/2000
Advertisement
