Getting Started - Fora 6 Duo Owner's Manual

Screen Display
1 2 3
5
7
8
9
10
11
12
13
1. Blood Drop Symbol
2. Test Strip Symbol
3. Universal Tone Symbol

Getting Started

Initial Setup
Please follow the initial setup procedure before using the device
for the first time or after you have replaced the battery. When the
battery power is extremely low and "
screen, the meter cannot be turned on.
Step 1: Enter the Setting Mode
1. The meter turns on automatically once a new battery is inserted.
Note: When you turn on the meter by pressing MAIN button for the
first time, the meter will turn off automatically due to no data.
2. Start with the meter off (no test strip inserted). Press and hold ▲ and ▼ at the
same time.
Step 2: Configuring the Settings (Date, Time, Universal Tone, Memory Deletion and
Reminder Alarm)
Press ▲ or ▼ to adjust the value or enable/disable the setting. Then press MAIN
button to confirm the setting and switch to another field.
4. Low battery Symbol
4
5. Ketone Symbol / Ketone Warning
6. Blood Glucose Symbol
6
7. Test Result
8. QC Mode
QC - control solution testing
9. Measurement Mode
AC - before meal
PC - after meal
Gen - any time of day
14
10. Memory Symbol
11. Day Average
12. Warning Symbol
13. Date & Time
14. Measurement Unit
(The measurement unit of the meter
depends on the actual specification
provided for the sales area.)
& " appears on the
Set [Year] Set [Month]
Set [Minute] Set [Beep On,
Universal Tone,
Beep Off]
Set [Reminder Set [Alarm Time
Alarm] (Hour)]
Note: • Press ▲ to select
Beep On, Universal Tone
On or Beep Off. Press MAIN
button to confirm.
• When Universal Tone is turned on, the meter guides you through the blood glucose
test using beep tones; it also outputs the result as a series of beeps. • When Beep is
turned off, the alarm function will remain effective. • During memory deletion, select "
" to keep all saved results. • You may set it up to four reminder alarms. • To turn
EN-2
Set [Day] Set [Hour]
Delete Memory
Records
Set [Alarm Time
(Minute)]