GE Monogram ZVC48L5SS Owner's Manual page 7

Care and Cleaning
Custom Hood Insert
Stainless
steel hood
surfaces
Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm
sudsg water or a stainless steel cleaner or polish.
Alwags wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest gou, please call our toll-free
number:
National Parts Center 800.626.2002
monog re m.co m
Light bulbs
To change the light bulbs:
1. Grasp the outer trim ring and twist until reaching
the unlock position. Then pull the ring straight out.
2. Grasp the bulb and twist until reaching the unlock
position. Then gentlg pull the bulb straight out.
3. Replace with the same wattage, tgpe and size
bulb. Wear gloves. Do not touch bulb with gout
bare fingers.
These 120 volt, S0 watt halogen bulbs with a
GU10 base are available at specialtg lighting
stores and home building centers.
.
Replace the outer trim ring bg inserting the two
retaining tabs into the two tab slots, pressing the
ring flush with the surface of the hood insert and
twisting until reaching the lock position.