Akuvox C315 Series Admin Manual
  1. Manuals
  2. Brands
  3. Akuvox Manuals
  4. Touch terminals
  5. C315
  6. Admin manual
Akuvox C315 Series Admin Manual

Akuvox C315 Series Admin Manual

Indoor monitor
Hide thumbs Also See for C315 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
About This Manual
About This Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C315 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Akuvox C315 Series

Summary of Contents for Akuvox C315 Series

  • Page 1 About This Manual About This Manual...
  • Page 2 Thank you for choosing the Akuvox C315 series indoor monitor. This manual is intended for the administrators who need to properly configure the indoor monitor. This manual applies to the 115.30.10.4 version, and it provides all the configurations for the functions and features of the C315 series indoor monitor.

  • Page 3: Product Overview

    Product Overview Product Overview C315 series is an Android SIP-based indoor monitor with a smooth touch-screen. It can be connected with the Akuvox door phone for audio/video communication, unlocking, and monitoring. Residents can communicate with visitors via audio/video call, and it supports unlocking the door remotely.

  • Page 4: Change Log

    Change Log Change Log High Security Mode.

  • Page 5: Model Specification

    Model Specification Model Specification...
  • Page 6 Introduction to Configuration Menu Introduction to Configuration Menu Status: this section gives you basic information such as product information, network information, Status account information, etc. Account: this section concerns the SIP account, SIP server, proxy server, transport protocol type, Account audio &...

  • Page 8: Access The Device

    Access the Device Access the Device Akuvox indoor monitor system settings can be either accessed on the device directly or on the device web interface. Device Start-up Network Selection Device Start-up Network Selection Akuvox indoor monitor system settings can be either accessed on the device directly or on the device's web interface.
  • Page 9 Akuvox indoor monitor supports two different home screen display modes: Call list simple, Call list simple, Classic. Choose one suitable mode for your scenarios. Classic Access the Device Setting on the Device Access the Device Setting on the Device...
  • Page 10 Access Device Basic Setting Access Device Basic Setting You can access the device's basic setting and advance setting where you can configure different types of functions as needed. To access the device's basic setting by pressing More More > > Settings Settings.
  • Page 11 Access the Device Setting on the Web Interface Access the Device Setting on the Web Interface You can also enter the device IP address on the web browser in order to log in to the device web interface where you can configure and adjust parameters, etc. You can check device IP on device Settings >...
  • Page 13 Note Note Download IP scanner: https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP https://knowledge.akuvox.com/docs/akuvox-ip-scanner?highlight=IP See detailed guide: https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip- https://knowledge.akuvox.com/v1/docs/en/how-to-obtain-ip-address-via-ip- scanner?highlight=IP%20Scanner scanner?highlight=IP%20Scanner Google Chrome browser is strongly recommended. The initial username and password are admin admin and please be case-sensitive to the user names and passwords entered.

  • Page 14: Language Setting

    Language and Time Setting Language and Time Setting When you first set up the device, you might need to set the language to your need or you can do it later if needed. And the language can either be set up directly on the device or on the device web interface according to your preference.

  • Page 15: Time Setting

    Time Setting Time Setting Time settings, including time zone, date and time format, and more, can be configured either on the device or the web interface. Time Setting on the Device Time Setting on the Device To set up time setting on the device Settings > Time Settings >...
  • Page 16 Set Date Set Date : enter the date when it is in manual mode. Set Time Set Time : enter the time when it is in manual mode. Use 24-Hour Format Use 24-Hour Format: tick the checkbox to select 24-hour time format. Time Zone Time Zone : select the specific time zone depending on where the device is used.
  • Page 17 Parameter Set-up: Parameter Set-up: Preferred Server Preferred Server: enter the NTP server address you obtained. Secondary Server Secondary Server: enter the back up server address. When the main NTP server failed, it will change to the back up server automatically.

  • Page 18: Screen Display Setting

    Screen Display Setting Screen Display Setting Screen Display Setting on the Device Screen Display Setting on the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc. You can do this configuration on the device More > Settings > Display More >...
  • Page 19 Screen Display Setting on the W eb Interface Screen Display Setting on the W eb Interface Akuvox series indoor monitor allows you to enjoy a variety of screen displays to enrich your visual and operational experience through the customized setting to your preference.
  • Page 20 Parameter Set-up : Parameter Set-up Screen Saver Pictures Screen Saver Pictures: select the existing screen saver pictures. Screen Saver Videos Screen Saver Videos: select the existing screen saver video. Picture Files Picture Files: choose a picture file you want to use for the screen saver. Video Files Video Files: choose a video file you want to use for the screen saver.

  • Page 21: Status Bar

    Upload Wall Paper Upload Wall Paper You can customize your screen background picture on the device web to achieve the visual effect and experience you need for your personalized screen background display. To configure it on the web Phone > Display Setting > Wallpaper Phone >...
  • Page 22 .png format with 50K maximum. Icon Screen Display Configuration Icon Screen Display Configuration Akuvox indoor monitor allows you to customize icon display on the Home Home screen and More More screen for the convenience of your operation on the device web.
  • Page 23 Parameter Set-up : Parameter Set-up Type Type : click to select among options: DND, Message, Contact, Call, Display, System DND, Message, Contact, Call, Display, System Info, Setting, Sound, Arming, SOS, Browser, Motion Detection, Custom APK, Info, Setting, Sound, Arming, SOS, Browser, Motion Detection, Custom APK, Lift, Relays, Unlock, Smart Living, Doorbell, N/A Lift, Relays, Unlock, Smart Living, Doorbell, N/A .
  • Page 24 Sound and Volume Configuration Sound and Volume Configuration Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. Configure Volume on the Device Configure Volume on the Device You can adjust the microphone volume, speaker volume, keypad volume, and AD volume on the device.
  • Page 25 Notification Sound Notification Sound : select the ringtone for the incoming message. Doorbell Ringtone Doorbell Ringtone : select the ringtone for doorbell. Configure Volume on the W eb Interface Configure Volume on the W eb Interface On the web interface, you can set the tamper alarm volume, mic volume, etc. Go to Phone >...
  • Page 26 Note Note Doorbell sound files and Alarm ringtone files to be uploaded must be .WAV .WAV or MP3 format.

  • Page 27: Device Network Configuration

    Network Setting & Other Connection Network Setting & Other Connection Device Network Configuration Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Configure Network Connection on the Device Configure Network Connection on the Device To check and configure the network connection on the device More >...
  • Page 28 IP Address IP Address : set up the IP address if the static IP mode is selected. Subnet Mask Subnet Mask: set up the subnet mask according to your actual network environment. Default Gateway Default Gateway: set up the correct gateway according to the IP address. Pri/Sec DNS Server Pri/Sec DNS Server: set up preferred or alternate DNS Server (Domain Name Server) according to your actual network environment.
  • Page 29 Device Deployment in Network Device Deployment in Network To facilitate device control and management, configure Akuvox intercom devices with details such as location, operation mode, address, and extension numbers. To deploy the device in the network on web Network > Advanced > Connect Setting Network >...
  • Page 30 Discovery Mode Discovery Mode : turn on the discovery mode of the device so that it can be discovered by other devices in the network, and disable it if you want to conceal the device so as not to be discovered by other devices. Device Address Device Address : specify the device address by entering device location info from the left to the right: Community, Unit, Stair, Floor, Room...
  • Page 31 Device Bluetooth Data Transmission Device Bluetooth Data Transmission To transfer data via Bluetooth by pressing Pair new device Pair new device .
  • Page 32 Note Note After successful Bluetooth pairing, data transmission can be carried out. Device W i-Fi Setting Device W i-Fi Setting You can set the Wi-Fi on the device at More > Settings > Advance Settings > WLAN More > Settings > Advance Settings > WLAN screen.

  • Page 34: Phone Book Configuration

    Phone Book Configuration Phone Book Configuration Phone Book Configuration on the Device Phone Book Configuration on the Device You can configure the contacts list in terms of adding and modifying contact groups or contacts on the device More > Contacts More >...

  • Page 35: Edit Contacts

    Parameter Set-up: Parameter Set-up: Contact Name Contact Name : name the contact. Number Number: enter the IP or SIP number. Camera URL Camera URL enter the RTSP URL for video preview. Auto Ringtone Auto Ringtone : select the phone ringtone for incoming calls. Account1 Account1 : select which account to use to dial out, Account 1 or Account 2.
  • Page 36 Blocklist Settings on the Device Blocklist Settings on the Device You can choose from the contact list the contact you want to add to the block list.
  • Page 37 Note Note You can delete contacts regardless of whether it is on the All Contacts All Contacts screen or the Blocklist Blocklist screen. Phone Book Configuration on the W eb Interface Phone Book Configuration on the W eb Interface Contact Configuration Contact Configuration To conduct contact configuration on the web Contacts >...
  • Page 38 Parameter Set-up: Parameter Set-up: Name Name : name the contact. Number Number: enter the contact number (SIP or IP number). Group Group : select Default or Blocklist group. Account Account: select Account1 or Account2 to dial out. You can dial out a number using the contact phone number.
  • Page 39 Block List Setting on the Web Interface Block List Setting on the Web Interface You can set the blocklist directly in the contact list on the web Contacts > Local Contacts > Contacts > Local Contacts > Local Contacts List interface or set it when editing a contact. Local Contacts List Note Note...
  • Page 40 Show Local Contacts Only Show Local Contacts Only: if you enable the function, the contact on the device will only show the local phonebook, and the contact for discovery mode will be hidden. Contacts Import and Export on the Web Interface Contacts Import and Export on the Web Interface When the contact becomes so many that you cannot afford to manage each contact one by one manually, you can import and export the contacts in batch on the device web.
  • Page 41 Intercom Call Configuration Intercom Call Configuration IP Call & IP Call Configuration IP Call & IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. To configure the IP call feature and port on the device web Phone >...
  • Page 42 SIP Account Registration Each device needs a SIP account to make and receive SIP calls. Akuvox intercom devices support the configuration of two SIP accounts, which can be registered under two independent servers. To configure the SIP account on the device More > Settings > Advance Settings > Account More >...

  • Page 43: Sip Server Configuration

    SIP servers enable devices to establish and manage call sessions with other intercom devices using the SIP protocol. They can be third-party servers or built-in PBX in Akuvox indoor monitor. To perform the SIP account setting on the web Account > Basic > SIP Account Account >...
  • Page 44 start automatically if the account registration fails during the registration time span. The default registration period is 1800 1800 , ranging from 30-65535s 30-65535s. Outbound Proxy Server configuration Outbound Proxy Server configuration An outbound proxy server receives and forwards all requests the designated server. It is an optional configuration, but if set it up, all future SIP requests get sent there in the first instance.
  • Page 45 Parameter Set-up : Parameter Set-up DND : Check the Whole Day Whole Day or Schedule Schedule to enable the DND function. DND function is disabled by default. Schedule Schedule : Enable the DND schedule for your indoor monitor. To configure a specific time to enable the DND feature.
  • Page 46 Akuvox intercom devices support four data transmission protocols: User Datagram User Datagram Protocol(UDP), Transmission Control Protocol(TCP Protocol(UDP) Transmission Control Protocol(TCP ), Transport Layer Security Transport Layer Security(TLS TLS ), and DNS-SRV DNS-SRV . To do this configuration on web Account > Basic > Transport Type Account >...

  • Page 47: Call Setting

    Call Setting Call Setting Call Auto-answer Configuration Call Auto-answer Configuration Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the communication mode between audio and video. To enable or disable on web Account >...
  • Page 48 Answer Mode Answer Mode : set up the video or audio mode you preferred for answering the call automatically. Indoor Auto Answer Mode Indoor Auto Answer Mode : turn on the Auto Answer Auto Answer function for calls from other indoor monitors by ticking the check box.
  • Page 49 Note Note SIP/IP number files to be imported or exported must be in either .xml xml or .csv csv format. SIP/IP numbers must be set up in the phone book of the indoor monitor before they can be valid for the auto-answer function. Live Stream Setting Live Stream Setting The Receive Live Stream function enables the indoor monitor to view the one-way video stream...
  • Page 50 If you want to see the image at the door station before answering the incoming call, you can enable the intercom preview function on web Phone > Call Feature > Intercom Phone > Call Feature > Intercom interface. Parameter Set-up : Parameter Set-up Intercom Preview Intercom Preview: enable the incoming call preview function.
  • Page 51 Internet phone eavesdropping is a network attack that allows unauthorized parties to intercept and access the content of the communication sessions between intercom users. This can expose sensitive and confidential information to the attackers. SIP hacking protection is a technique that secures SIP calls from being compromised on the Internet.
  • Page 52 SOS Number Settings SOS Number Settings To set up SOS numbers on device web Phone > Intercom Phone > Intercom interface. Parameter Set-up : Parameter Set-up Account Account: Select the account you want to make SOS from account 1 or account 2. Call Number Call Number: To set up 3 SOS numbers.

  • Page 53: Multicast Configuration

    The indoor monior supports RF (Radio Frequency) module to connect a pendant to trigger some actions, like unlocking or making an emergency call. After pairing pendants and indoor monitors, then setup different RF actions on device. After powering on the pendant, click Learning Learning and press pendant one time, they will be paired.
  • Page 54 To configure it on web Phone > Multicast Phone > Multicast interface. Parameter Set-up : Parameter Set-up Multicast Group Multicast Group : set the indoor monitor in one of the groups or disable this function. Display Multicast In Homepage Display Multicast In Homepage : if you disable it, the All Call All Call on the left side of the device screen will be hidden.
  • Page 55 Call Forwarding Setting Call Forwarding Setting Call Forward is a feature that allows for transferring incoming calls to another number. Users can set up call forwarding according to different situations, such as always forwarding calls, forwarding calls when the indoor monitor is busy, or when it doesn’t pick up the call. Call Forwarding Configuration on the Device Call Forwarding Configuration on the Device To do the configuration on the device Settings >...
  • Page 56 Forwarding Number Forwarding Number: To enter the specific forward number if the device enables always forward/busy forward/no answer forward. Capture Path Capture Path: select the storage location for all the captured pictures. Call Forwarding Configuration on the Web Interface Call Forwarding Configuration on the Web Interface To set up forward function on web Phone >...
  • Page 57 Door Access Control Configuration Door Access Control Configuration Relay Switch Setting Relay Switch Setting Local Relay Setting Local Relay Setting A local relay is an external unit that is physically nearby and directly connected to the intercom device. It allows the intercom system to trigger actions, such as unlocking a door, based on user input or authorization.
  • Page 58 Remote Relay Switch Setting Remote Relay Switch Setting You can use the unlock tab during the call to open the door. To configure it on web Phone > Relay Phone > Relay > Relay Setting > Remote Relay interface. You are required to set up the same DTMF code in >...
  • Page 59 Parameter Set-up : Parameter Set-up Password Password : the passwords are authenticated via HTTP and you can define the passwords using HTTP Get in Action. Web Relay Action Web Relay Action : enter the specific web relay action command provided by the web manufacturer for different actions by the web relay.
  • Page 60 Door Unlock Configuration Door Unlock Configuration Door Unlock by DTMF Code Door Unlock by DTMF Code Dual-tone multi-frequency signaling(DTMF DTMF ) is a way of sending signals over phone lines by using different voice-frequency bands. Users can use the DTMF function to unlock the door for visitors during a call by either typing the DTMF code on the soft keypad, or tapping the unlock tab with the DTMF code on the screen.
  • Page 61 Parameter Set-up : Parameter Set-up Status Status: enable it to allow the relay to be triggered remotely using the HTTP command. Username Username : enter the device username to be used as a part of the HTTP command to trigger the local relay. Password Password : enter the device password to be used as part of the HTTP command to trigger the local relay.

  • Page 63: Manage Text Messages

    Intercom Message Setting Intercom Message Setting Manage Text Messages Manage Text Messages You can check, create and clear messages as needed on the indoor monitor Messages Messages screen. Click New New to create a new text message and Clear Clear icon to delete the existing messages. Manage Voice Messages Manage Voice Messages You can create, delete and view the audio messages recorded by family members on the device...

  • Page 65: Audio Codec Configuration

    Video Codec Configuration Video Codec Configuration C315 series supports VP8, H263, H264, H265 codec that provides a better video quality at a much lower bit rate with different video quality and payload. To do the configuration on web Account >...
  • Page 66 Parameter Set-up : Parameter Set-up Codec Resolution Codec Resolution: select the codec resolution for the video quality among five options: QCIF, CIF, VGA, 4CIF QCIF, CIF, VGA, 4CIF and 720P 720P according to your actual network environment. H263 only has QCIF, CIF, 4CIF QCIF, CIF, 4CIF .
  • Page 67 Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox devices to access DHCP, PNP, TFTP, FTP, and HTTPS the URL of the address of the third-party server which stores configuration files and firmware, which will then be used to update the firmware and the corresponding parameters on the device.
  • Page 68 Autop Schedule Autop Schedule Akuvox provides you with different Autop methods that enable the device to perform provisioning for itself according to the schedule. To set up the schedule on the device web Upgrade > Advanced > Automatic Autop...
  • Page 69 Parameter Set-up : Parameter Set-up Power On Power On: select Power on Power on if you want the device to perform Autop every time it boots Repeatedly Repeatedly: select Repeatedly Repeatedly if you want the device to perform Autop according to the schedule you set up.
  • Page 70 Note Note The Custom Option type must be a string. The value is the URL of TFTP server. Navigate to Upgrade > Advanced > DHCP Option Upgrade > Advanced > DHCP Option interface. Parameter Set-up : Parameter Set-up Custom Option Custom Option: enter the DHCP code that matches the corresponding URL so that the device will find the configuration file server for the configuration or upgrading.
  • Page 71 DHCP Option 43 DHCP Option 43 : if the device does not get an URL from DHCP Option 66, it will automatically use DHCP Option 43. This is done within the software and the user does not need to specify this. To make it work, you need to configure the DHCP server for option 43 with the updated server URL in it.
  • Page 72 FTP: ftp://192.168.0.19/(allows anonymous login) ftp://username:password@192.168.0.19/(requires a user name and password) HTTP: http://192.168.0.19/(use the default port 80) http://192.168.0.19:8080/(use other ports, such as 8080) HTTPS: https://192.168.0.19/(use the default port 443) Akuvox do not provide user specified server. Please prepare TFTP/FTP/HTTP/HTTPS server by yourself.

  • Page 73: Monitor Setting

    Security Security Monitor and Image Monitor and Image Monitor Setting Monitor Setting You can add up to four video streams using RTSP. If the Display in Call function is enabled, the video of the added monitor device will show up when it calls the indoor monitor. Navigate to the web Phone >...
  • Page 74 Monitor Display Monitor Display: select Multiple Window Multiple Window if you want to display four video monitoring channels on the screen. Select Single Window Single Window if you want to display only one video monitoring channel. Device Number Device Number: type in the monitored device number for identification. Device Name Device Name : type in the device name for identification.

  • Page 75: Rtsp Authentication

    RTSP Authentication RTSP Authentication With RTSP authentication, users can monitor the indoor monitor via RTSP audio stream. This feature can be applied to, for example, listen to the baby in the baby’s room for safety. To set it up, go to Device Setting > Basic > RTSP Setting Device Setting >...
  • Page 76 Parameter Set-up : Parameter Set-up Authorization Type Authorization Type : select the authorization type (Basic, Digest Basic, Digest). Select None None if you allow all types of authorization types for the RTSP audio stream. User Name User Name : type in the username used for the authentication. Password Password : type in the password used for the authentication.
  • Page 77 To check the zone status on Arming > Zone Status Arming > Zone Status screen. Configure Alarm and Arming on the Web Interface Configure Alarm and Arming on the Web Interface To set up a location-based alarm sensor on the device web Arming> Zone Setting > Zone Arming>...
  • Page 78 Parameter Set-up : Parameter Set-up Location Location: set up the location according to where the alarm sensor is stalled. You can select among ten location types: Bedroom, Gate, Door, Guest Room, Hall, Window, Bedroom, Gate, Door, Guest Room, Hall, Window, Balcony, Kitchen, Study Balcony, Kitchen, Study, and Bathroom Bathroom.
  • Page 79 Parameters Set-up : Parameters Set-up Location Location: to select which location the detection device is located, including Bedroom, Bedroom, Guest Room, Hall, Window, Balcony, Kitchen, Study Guest Room, Hall, Window, Balcony, Kitchen, Study, and Bathroom Bathroom. Zone Type Zone Type : to select the type of detection device, including Infrared, Drmagnet, Infrared, Drmagnet, Smoke, Gas Smoke, Gas, and Urgency...
  • Page 80 Parameter Set-up : Parameter Set-up Customized Alarm Customized Alarm : enable the feature before you can type in the customized alarm text. Alarm Context Alarm Context: type in the alarm text in the specific arming zone. The alarm text will be displayed when an arming is triggered.
  • Page 81 Configure Alarm Ringtone Configure Alarm Ringtone You can upload a customized alarm ringtone by choosing the local audio file on web Phone > Phone > Audio > Alarm Ringtone interface. Audio > Alarm Ringtone Note Note The file format of the customized ringtone should be .wav. Alarm Action Configuration Alarm Action Configuration When the alarm sensor is triggered, it can start different actions, such as HTTP commands, SIP...
  • Page 82 Configure Alarm Action via HTTP Command Configure Alarm Action via HTTP Command To set up the HTTP Command action, you can click Enable Enable in the Send HTTP Send HTTP field to enable the actions for the alarm sensor installed in different locations. Then enter the HTTP command provided by the manufacturer of the device on which the action is to be carried out.
  • Page 83 Configure Alarm Action via SIP Message Configure Alarm Action via SIP Message The device can send messages to a designated device when the alarm is triggered. To set this up, enter a SIP number or IP address along with the message content. Parameter Set-up : Parameter Set-up Enabled/Disabled...
  • Page 84 Parameter Set-up : Parameter Set-up Make Call Make Call: enable it so that a call will go to the designated SIP or IP number when alarm is triggered. Alarm Siren Alarm Siren: enable it if you want to trigger alarm siren on the indoor monitor when the alarm is triggered.
  • Page 85 Screen Unlock Setting Screen Unlock Setting To prevent unauthorized access to the device when it is not being used, enable the Screen Lock function. This feature automatically locks the device after a period of inactivity, requiring a password to unlock. You can enable screen lock function directly on the device Settings >...

  • Page 86: Voice Encryption

    Note Note The default unlock PIN is 123456. Voice Encryption Voice Encryption The encryption function provides three encryption methods to protect voice signals from eavesdropping during a call. Go to Account > Advanced > Encryption Account > Advanced > Encryption interface. Parameter Set-up: Parameter Set-up: Voice Encryption...

  • Page 87: Remote Control

    session key. Remote Control Remote Control The remote control function allows a specific server to send HTTP commands or requests to the indoor monitor for actions like unlocking a local relay. Navigate to Phone > Call Feature > Remote Control Phone >...
  • Page 88 Client Certificate Setting Client Certificate Setting Certificates ensure communication integrity and privacy. To use the SSL protocol, you need to upload the right certificates for verification. Web Server Certificate Web Server Certificate To upload web server certificate on the device web interface Security > Advanced > Web Security >...
  • Page 89 Power Output Setting The indoor monitor can serve as a power supply to the Akuvox door phone with 12V power supply for example E10. You can enable the power output, then connect the door phone to the RJ45 port on...

  • Page 90: High Security Mode

    To enable it, go to the Device Setting > Basic > Power Output Setting Device Setting > Basic > Power Output Setting interface. Note Note When the Power Output Power Output function is enabled, and the PON interface is connected with some particular exchangers, it may cause the device to reboot repeatedly.
  • Page 91 If the mode is off, the device can use both the new formats above and the old format below: l http://deviceIP/fcgi/do? action=OpenDoor&UserName=username&Password=password&DoorNum=1 4. It is not allowed to import/export configuration files in tgz. format between a device with the high security mode and another one without it. For assistance with file transfer, please contact Akuvox technical support.
  • Page 92 Call Log Call Log If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period, you can check and search the call log on the device web interface and export the call log from the device if needed.

  • Page 93: Lift Control

    Lift Control Lift Control You can summon a lift via the lift control feature. Configure Lift Control Configure Lift Control To enable and set the Lift Lift icon on device web Phone > Lift > Lift Control Phone > Lift > Lift Control interface. Parameter Set-up : Parameter Set-up Status...
  • Page 94 If there are huge amounts of prompts that need to be added, you can click Export Export tab to export a template on the same page. After editting the file, import it to the web.
  • Page 95 Device Integration with Third Party Device Integration with Third Party Enter Applications Screen Enter Applications Screen The content of this part mainly teaches you how to enter the APK interface through hidden operations. To do the configuration on device Settings > System Info Settings >...
  • Page 96 Install Third-party App Install Third-party App You can install the third-party app to your device on the device web Phone > App Phone > App interface. Choose a suitable .apk file from the PC to upload. To configure the installed third-party app on the web Phone > Key/Display > Third Party APK Phone >...
  • Page 97 Parameter Set-up : Parameter Set-up App Name App Name : select the app to be configured. Interval Without Operating (Sec) Interval Without Operating (Sec): enable it to set the app returning time interval when there is no operation on the device. Start Up Enable Start Up Enable : enable it if you want the app to run automatically when the device is turned on.
  • Page 98 HTTP command HTTP command : set up the HTTP command to trigger the sensor. Note Note To configure Smart Living button on Phone > Key/Display Phone > Key/Display interface. Display Third-party W ebpage after Booting Up Display Third-party W ebpage after Booting Up If you want the device screen to go to any third-party servers or the third-party webpage after the device's boot-up, you can type in their URL.
  • Page 99 To allow the third-party devices to integrate with the indoor monitor, you need to set up API authentication by setting up a username and password. You also need to select the authentication code for the API-based integration. To set the API authentication, go to Security > API Security >...

  • Page 101: Firmware Upgrade

    Firmware Upgrade Firmware Upgrade Akuvox devices can be upgraded on the device web interface. Firmwares of different versions for the indoor monitors can be upgraded on the device web Upgrade > Basic interface. Upgrade > Basic Note Note Firmware files should be .zip...
  • Page 102 Backup Backup You can import or export encrypted configuration files to your Local PC. Navigate to Upgrade > Advanced > Others Upgrade > Advanced > Others interface if needed.
  • Page 103 Parameter Set-up Log Level Log Level: select log levels from 1 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purpose. The default log level is 3 3 , the higher the level is, the more complete the log is.

  • Page 104: User Agent

    Parameter Set-up : Parameter Set-up PCAP Specific Port PCAP Specific Port: select the specific ports from 1-65535 so that only the data packet from the specific port can be captured. You can leave the field blank by default. PCAP PCAP : click Start Start tab and Stop Stop tab to capture a certain range of data packets before clicking Export...

  • Page 106: Password Modification

    Password Modification Password Modification Modify Device Basic Settings Password Modify Device Basic Settings Password To do the configuration on the device Advance Settings > System Code Advance Settings > System Code screen to change a new password. The default password is 123456. Modify Device Advance Settings Password Modify Device Advance Settings Password This password is used to enter the advance settings of the device, including password settings,...
  • Page 107 Modify Device W eb Interface Password Modify Device W eb Interface Password To modify web interface password, you can do it on device web Security > Basic > Web Security > Basic > Web Password Modify interface. Select Admin Password Modify Admin for the administrator account and User User for the user account.
  • Page 108 Note Note There are two accounts, one is admin, its password is admin, the other is user, its password is user. Modify Browser Password Modify Browser Password This password is used to lock the browser on the device in case someone abuses the browser for any unwanted application.
  • Page 110 System Reboot & Reset System Reboot & Reset Reboot Reboot Reboot on the Device Reboot on the Device If you want to reboot the system setting of the device, you can operate it directly on the device setting screen or on the device web interface. To reboot to the system setting on device Settings >Reboot Settings >Reboot screen.
  • Page 111 To set up the device reboot schedule on web Upgrade > Advanced > Reboot Schedule Upgrade > Advanced > Reboot Schedule interface. Reset Reset Reset on the Device Reset on the Device If you want to reset the whole device system to the factory setting, you can operate it directly on the device Settings >...
  • Page 112 Reset on the Web Interface Reset on the Web Interface The device system can also be reset on device web interface without approaching the device. If you only want to reset the configuration file to the factory setting, you can click Reset Config Reset Config .

This manual is also suitable for:

C315x

Table of Contents