Martin IMMN380FPM Setup Instructions

IMMN380FPM MASON FIREPLACE CONSOLE-MONARCA
No.
A
B
C
D
Caution: Please read all instructions before assembly and check the carton for any parts that may have come loose during shipment.
It is recommended to use two or more people during the assembly process.
Step 1:
Lay down the fireplace console (A) on a
non abrasive working surface. Locate the
leg assembly (B) and bolt them from
inside cabinet using the bolts (4) use
allen key (5) to tighten bolts.
Step 2:
Install center support leg (C) and
adjust leveler if needed.
Step 3:
Turn the assembled fireplace
console upright. Assemble the two
handles (2) onto the Doors using
the Bolt (3).
Step 4:
Shelves are secured in place with screws
through a metal shelf pin for packing and
shipping. In order to adjust the shelf
remove the screw with Philips head
screwdriver (not included) and reposition
to desired height.
Step 5:
Anti-tip hardware kit must always be
used to prevent the case from tipping.
Attach anti-tip restraint at top of the case
inline to meet attachment on wall. Screw
anti-tip into wall stud or use appropriate
anchor for the type of wall if not drywall.
Please register your product at MartinFurniture.com.You'll find the warranty link on the bottom of the Home Page
· Use a soft, clean cloth that will not scratch the surface when dusting.
· Use of furniture polishes are not necessary. Should you choose to use polishes, test in an inconspicuous area first.
· Using solvents of any kind on your furniture may damage your furniture finish.
· Never use water to clean your furniture as it may cause damage to the finish.
· Always use coasters under beverage glasses and flowerpots.
· Liquid spills should be removed immediately. Use a soft, clean cloth, blot the spill gently. Avoid rubbing.
· Direct sunlight may damage wood finishes.
· Extreme temperature and humidity changes can cause warping, shrinking and splitting of wood furniture. It is best to keep furniture in a
climate controlled environment.
· Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.
· In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.
Date: 10 / 2024
SET-UP INSTRUCTIONS FOR ITEM
info@martinfurniture.com
1-619-671-5100
Parts List
Q'TY
Case
1 PC
Leg Assembly
2 PCS
Center Leg Support
1 PC
Crystal Pack- 1200grams 1 SET
4
5
Step 1
Anti-Tip Kit
Top
1
Leveler
WARRANTY PROTECTION
CARING FOR YOUR FURNITURE
®
No. Hardware List
1
Furniture Tipping Restraint
2 Door Handle
3
Bolt Φ5/32"*25mm
4 Bolt m6"*30mm
5
Allen Key (M4*80mm)
B
A
C
Step 2
Safety Strap
Tool Required: Philip Screw Driver
(not provided )
Wall
Step 5
B
FULL ASSEMBLY
Q'TY
1 SET
2 PCS
4 PCS
14 PCS
1 PC
2
3
Step 3
Step 4
www.martinfurniture com