Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Martin Manuals
  4. Indoor Furnishing
  5. U-DS1922W
  6. Assembly instruction manual

Martin U-DS1922W Assembly Instruction Manual

Split top
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
MANCHESTER SPLIT TOP
TABLE ASSEMBLY INSTRUCTIONS
U-DS1922W
IMPORTANT
If you have difficulty assembling your table, or need customer service
assistance, please call: Martin Universal Design, Inc. customer service
hotline at 1-313-895-0700, or email at custservmud@gmail.com. If
you need additional parts, it is not necessary to contact your dealer. Our
Customer Serice Representative will forward them to you immediatly.
1

Advertisement

loading

Related Manuals for Martin U-DS1922W

Summary of Contents for Martin U-DS1922W

  • Page 1 IMPORTANT If you have difficulty assembling your table, or need customer service assistance, please call: Martin Universal Design, Inc. customer service hotline at 1-313-895-0700, or email at custservmud@gmail.com. If you need additional parts, it is not necessary to contact your dealer. Our...

  • Page 2: Parts List

    PARTS LIST = Table Components = Fasteners and Tools Left Leg Right Leg Cross Support Cross Support Cross Support (Bottom) (Bottom) (Front Top) Cross Support Cross Support Drawer Support Drawer Top Main Top (Back Top) (Back) Tilt Mechanism Drawer Handle Hinge Bolt 6 x 50mm Bolt 6 x 28mm...
  • Page 3 Step 1 Assemble Glides Attach 4 floor glides (Part 33 ) to the left and right legs (Part 1 & 2 ) by tightening the glides into the specified holes at the bot- tom. Step 2 Assemble Table Base Attach the 5 cross supports (Parts 3 4 5 6 7 ) to the left leg (Part 1 ) by lining each up with appropriate hole.
  • Page 4 Step 4 Attach Tilt Mechanism and Hinges Attach Tilt mechanism (Part 11 ) to the base. Locate the 2 holes on the top side of cross support (Part 6 ) . Secure Tilt Mechanism to this cross support using 2 each 6x28mm bolts (Part 15 ) &...
  • Page 5 Step 6 Attach Main Top Align holes in hinges to the holes in top board. Attach the 2 hinges (Part 13 ) to the top by using 2 each 4x14mm screws (Part 19 ) per hinge and tighten with Phillips head screwdriver. B) Align holes in tilt mechanism (Part 11 ) to threaded holes in top.

  • Page 6: Drawer Assembly

    Step 7 Drawer Assembly Take the back panel (Part 25 ) and side panels of the drawer (Parts 27 & 28 ) and To secure drawer assembly, insert 2 each 4x35mm screws (Part ) into each drawer side panel and tighten with Phillips head screwdriver. Slide the drawer bottom (Part 29 ) into the grooves on the side of the drawers and into the back panel of the drawer.
  • Page 7 Insert cams (Part 22 ) into the holes found on each side panel, making sure the holes of the T-nuts (Part line up with the holes on the outer edge of the drawer sides. Attach sides of drawers (Parts & ) to the drawer front (Part ) by inserting threaded connection pins (Part...