Martin IMTE4094-FP Setup Instructions

N0:
A
B
C
N0:
A
Caution: Please read all instructions before assembly and check the carton for any parts that may have come loose during shipment. It is
STEP 1
Shelf is screwed in place for shipping,
use phillips head screwdriver to remove
screws from shelf pins. Four screws per
shelf. Refer to the drawing below:
Maximum Shelf Weight:
Please register your product at MartinFurniture.com.You'll find the warranty link on the bottom of the Home Page

Use a soft, clean cloth that will not scratch the surface when dusting.

Use of furniture polishes are not necessary. Should you choose to use polishes, test in an inconspicuous area first.

Using solvents of any kind on your furniture may damage your furniture finish.

Never use water to clean your furniture as it may cause damage to the finish.

Always use coasters under beverage glasses and flowerpots.

Liquid spills should be removed immediately. Use a soft, clean cloth, blot the spill gently. Avoid rubbing.

Direct sunlight may damage wood finishes.

Extreme temperature and humidity changes can cause warping, shrinking and splitting of wood furniture. It is best to keep furniture in a
climate controlled environment.

Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.

In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.
Date: 02 / 2024
SET-UP INSTRUCTIONS FOR ITEM
IMTE4094-FP FIREPLACE BOOKCASE
info@martinfurniture.com
Parts List
Bookcase
Adjustable
Shelf
Wooden cap
Tools Required
Phillips Tipped Screwdriver
recommended to use two or more people during the assembly process.
#A
2
#B
wood screw # 5/8" long
30 lbs(13.6kg)
WARRANTY PROTECTION
CARING FOR YOUR FURNITURE
®
Q'TY N0:
1 Anti-Tip H ardware Kit
1 PC
2
Shelf Holder
3 PCS
3 Allen wrench
4 Bolt (5/16*38mm)
8 PCS
5 Bolt (5/16*19mm)
Q'TY
6
Spring washer
1 PC
7 Flat washer
Wall
Safety Strap
#C
2
Anti-tip hardware kit must always be used to prevent the
case from tipping. Attach anti-tip restraint at top of the
case inline to meet attachment on wall. Screw anti-tip into
wall stud or use appropriate anchor for the type of wall if
not drywall. Adjust leveler if needed.
Parts List Q'TY
1 set
12pcs
2 PC
4 PCS
4 PCS
4 PCS
4 PCS
STEP 2 Anti-tip hardware kit
1
6
7
4
www.martinfurniture.com
3
5