Download Print this page

Martin U-DS92ST Assembly Instructions Manual

Creative center with padded stool

Advertisement

Quick Links

U-DS92ST Ashley Creative Center With Padded Stool
[1] - 23.5" x 35.5" Top
(1 piece)
[2] - Upper Base left End
(1 pieces)
[3] - Upper Base right
End (1 pieces)
[4] - Lower Base End
(2 pieces)
[5] - Cross Support
(1 piece)
[6] - Base Floor Support
(1 piece)
[7] - Board Brace
(1 piece)
IMPORTANT
If you have difficulty assembling your U-DS92ST
Creative Center or need customer service
assistance. Please call:
Martin Universal Design, Inc.
Customer Service Hot Line at
1-313-895-0700.
If you need additional parts, it is not necessary
to contact your dealer, our Customer Service Rep.
will forward them to you immediately.
Assembly Instructions
Parts List
[8] - Drawer Support Rods
(2 pieces)
[9] - Media Supports
(1 pieces)
[10] - Drawer Supports
(2 pieces)
[11] - Left Tilt mechanism
(1 piece)
[12] - Right Tilt mechanism
(1 piece)
[13] - Board Brace Clamp
(2 pieces)
[14] - Tool Trough
(1 piece)
4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: Custservmud@aol.com • visit us at www.MartinUniversalDesign.com
[15] - Plastic Thick Washer
(2 - pieces)
[16] - Floor Guides
(4 pieces)
[17] - Floor Support Spacer
(2 pieces)
[18] - End Cap Nut
(2 pieces)
[19] - 6x50mm Bolt
(2 pieces)
[20] - 6x45mm Bolt
(8 pieces)
[21] - 4x12mm Screw
(14 pieces)
[22] - Wrench (1 piece)
[23] - Allen Wrench
(1 piece)
[24] - 6x25mm Bolt
(2 piece)
[25] - Collars
(4 pieces)
[26] - 6x8mm Bolt
(6 pieces)
[27] - 6x40mm Bolt
(2 pieces)
[A] - Drawers
(1 set - these need
to be assembled)
Please see assembly
sheet for drawers.
Pg. 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the U-DS92ST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Martin U-DS92ST

  • Page 1 U-DS92ST Ashley Creative Center With Padded Stool Assembly Instructions Parts List [15] - Plastic Thick Washer [8] - Drawer Support Rods [22] - Wrench (1 piece) [1] - 23.5” x 35.5” Top (2 - pieces) (2 pieces) (1 piece) [9] - Media Supports...
  • Page 2 U-DS92ST Ashley Creative Center With Padded Stool Assembly Instructions STEP 1] Assembly Base of Table Begin by attaching the Cross support (part 5) to each Base End Unit (part 4). Secure cross support to leg of base units with [2] 6x45mm bolts (part 20). Tighten with Allen Wrench.
  • Page 3 U-DS92ST Ashley Creative Center With Padded Stool Assembly Instructions STEP 4] Attaching Board Brace FIG 4 PLEASE NOTE: Lay Table Top onto flat carpeted surface or empty flattened carton insuring top wont scratch, making sure the T-nut holes are facing up.
  • Page 4 U-DS92ST Ashley Creative Center With Padded Stool Assembly Instructions STEP 7] Attach Top to Base After Attaching the Tilt mechanism to the table top, you must attach the opposite end of the tilt mechanism to the base. Using [1] 6x40mm bolt (part 27), [1] Thick Plastic Washer (part 15) and [1] End Cap Nut (part 18) per mechanism.
  • Page 5 IMPORTANT If you have difficulty assembling your U-DS92ST Drawers or need customer service assistance. Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700. If you need additional parts, it is not necessary to contact your dealer, our Customer Service Rep.
  • Page 6 Tighten to secure. IMPORTANT If you have difficulty assembling your U-DS92ST Stool or need customer service assistance. Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700. If you need additional parts, it is not necessary to contact your dealer, our Customer Service Rep.